Hi all, the temp gauge of my blade engine isnt working can someone point me in the direction of the location of the sensor i cant spot it in the bay, many thanks.

Mines on the thermostat housing, top of the engine by one of the cooling hoses.

Cheers

Ian

It's on the thermostat housing on the old blade lumps, so look for the top large bore pipe and it's a small nipple next to it, like a male bullet connection. Give it a good clean first as a bad connections means the gaugue won't work.

EDIT for mistake

[Edited on 4/10/09 by Dangle_kt]

many thanks guys.

"water pump housing " read thermostat housing.

I have never managed to get one out whole, they just shear off.

Regards Mark