Hi ya , got aan acewell speedo on its way , can any one tell me where the best place to put the speedo sensor and any pics would be appreciated

Many thanks

Davrus

Just out of interest which one did u go for? every one seems to use the 31XX but ive got my eye on th 2853

I mounted mine on the O/S rear inner driveshaft joint and the cable part on the diff using a bracket off the Little torx bolt that adjusts the pinion bearing.
Steve.

Cobblers just seen your pics,(live axle) sorry, Looks a propshaft fitting then.

[Edited on 1/11/06 by stevec]

[Edited on 1/11/06 by stevec]

Propshaft towards the front. Nice stable reading and cock on for the SVA.

Hi, Can I be cheeky and ask if you have any pictures, as i was condsidering this.

many thanks in advance

quote:

---

Originally posted by Howlor
Propshaft towards the front. Nice stable reading and cock on for the SVA.

---

apologies for the blurred pic but I put mine here with the magnet sikaflexed in one of the holes

http://moog-designs.co.uk/MK_Indy/pages/DSC00046.htm

I dont have anything at the moment.

I have a 1000 faser, and was looking for some clocks.

Is the Acewell any good with a BEC, I will only use the car for trackdays so I need a rev counter, oil pressure, water temp and a neutral light.

Cheers,
Andy