Still struggling with the choice of gearbox to use with the RS4... T5 box seems the best was to go, but I'm still not convinced Tiger Cars Type-9 to Audi bellhousing will work on the T5 and dont want to risk £600 on finding out!

Sooo... anyone ever had a bespoke bellhousing made for them? Any indicative costs?

Does anyone know how similar or dissimilar the T5 pattern is to the Type-9... is it worth the gamble?

Link to Tiger...

LINKY

One of Tigers Type-9 to Audi...

quote:

---

Originally posted by scootz
Does anyone know how similar or dissimilar the T5 pattern is to the Type-9... is it worth the gamble?

---

in one of the car mags, PPC? there was article about making your own bell housing. want me to look for it?

That would be splendid if you can find the time (can you make it for me too???)!

possibly the just drill it diferent for the T5 ( shopwn bellow )



regards

Agriv8

[Edited on 4/11/09 by Agriv8]

quote:

---

Originally posted by 02GF74
in one of the car mags, PPC? there was article about making your own bell housing. want me to look for it?

---

I have used a porsche 924 turbo bellhousing and a adaptor to mount my audi engine to a type 9, bell housing was £30 and I made a fabracated adaptor. However it is kinda shallow but is possible to use a spacer which is standard on various audis ti space the bell from the block if more space needed.

The spacer is alloy so if where make your own bell it itself could be off use to you if make a alloy bell. I too would be intrested to see this article