Hi guy's, (how gay does that sound lol)
anyway, I just brought a MT75 gearbox for my Luego but it will not bolt onto my 1.6 Ford sigma engine and has no bellhousing i can remove. Does any1
have a Type 9 or wanna swap or something..
Stuart
If you want to offload the gearbox I'd be interested as long as it's not too far away from me (Sussex)
I have a spare type 9 if you are interested
Cheers
Mark
Isn't the Sigma a Mazda engine?
I imagine that it will be difficult to find a suitable bellhousing with any Ford RWD gearbox.
Only guessing but but maybe a MX5 gearbox might fit?
Pure speculation, but hope it helps
Cheers
Mark
Thanks Guys. Im near Milton keynes.
The sigma is a Yamaha developed all alloy block 1.6 from the focus its kind or a duratec... Luckily my dad is pretty handy at this and we are cutting
up the ould gearbox to make a Bellhousing for the type 9.
1.6 on emerald ecu,cams, gsxr750 throttle bodies and manifold should be around 180 bhp and rev to 8100 with arp end bolts. but it is ssssooooo
light,
Where are you
quote:
Originally posted by TVR_3000MTURBO
Where are you
Hi Jon - just hope that Graham Bowden doesn't read this site and beat you to it....
Pete
Hi Stuart
You can get bellhousing and tuning bits from Shawspeed
http://www.shawspeed.com/fsigma.htm
Adrian
quote:
Originally posted by Petemate
Hi Jon - just hope that Graham Bowden doesn't read this site and beat you to it....
Pete
Sorry, Been offline for a while.
Im in Milton Keynes J12 M1
Kinda need a Type9 Quick to make a bell housing. I would get one from Shawspeed but i need it custome made so i can get the engine as far back as
possible with the flywheel just in front of the footwell. Plus the one i made before was much lighter aswell,
As for Shawspeed the guy is a legend, Im getting him to fit my cams and shim them as the engine has solid lifters std. The guy is very cheep and Knows
his stuff.
So any1 have a type 9 near bedfordshire. And cortina uprights, (lol worth a try) They are to rare for my liking.
Stuart
sorry, was the type 9 the 5 speed sierra box?
quote:
Originally posted by TVR_3000MTURBO
Sorry, Been offline for a while.
Im in Milton Keynes J12 M1
Kinda need a Type9 Quick to make a bell housing. I would get one from Shawspeed but i need it custome made so i can get the engine as far back as possible with the flywheel just in front of the footwell. Plus the one i made before was much lighter aswell,
As for Shawspeed the guy is a legend, Im getting him to fit my cams and shim them as the engine has solid lifters std. The guy is very cheep and Knows his stuff.
So any1 have a type 9 near bedfordshire. And cortina uprights, (lol worth a try) They are to rare for my liking.
Stuart
The key word you use there is 'Almost'
I want the flywheel just in front of the footwell, Plus i want the hyd. clutch, Have you seen how much that costs from them...wwooooooowww
not nocking them they 'rock' but my box only cost 50quid with 10K Miles on the clock and has a hyd thrust bearing unit. All i need to do is
hack out all the gears weld on a flat plate, machine out the centre boar for the gearbox and hay presto, Hyc bellhousing for £100
trust me im 21..
lol