Triton
|
| posted on 10/1/09 at 12:07 PM |
|
|
Seats for the Striker/Riot
I will have my high sided seat sorted for fitting into the Striker and Riot once mould cured so at last folk have another choice other than bits of
wood covered in pvc....
It's a specific Striker/Riot seat, so a different shape at the front to allow for the taper in the chassis...Price £225 per pair unless I get
flooded with orders to point I can reduce it maybe...
Cheers,
Mark
[Edited on 10/1/09 by Triton]
My Daughter has taken over production of the damn fine Triton race seats and her contact email is emmatrs@live.co.uk.
www.tritonraceseats.com
www.hairyhedgehog.com
|
|
|
|
|
bigfoot4616
|
| posted on 10/1/09 at 09:48 PM |
|
|
whats the dimensions? mainly the width at the front
|
|
|
Triton
|
| posted on 10/1/09 at 10:51 PM |
|
|
Width across the front is 340mm and 370mm across the back at the base.
It's only the high side seat but can be made in the superlite version for those wanting to save a bit more weight.
My Daughter has taken over production of the damn fine Triton race seats and her contact email is emmatrs@live.co.uk.
www.tritonraceseats.com
www.hairyhedgehog.com
|
|
|
bigfoot4616
|
| posted on 11/1/09 at 09:15 PM |
|
|
sorry mate, one more measurement needed.
whats the overall length? straight line down from back of headrest to front edge of seat.
cheers
|
|
|
Triton
|
| posted on 11/1/09 at 09:28 PM |
|
|
I will have to do that tomorrow now. Diagonal measurement?
Mark
My Daughter has taken over production of the damn fine Triton race seats and her contact email is emmatrs@live.co.uk.
www.tritonraceseats.com
www.hairyhedgehog.com
|
|
|
bigfoot4616
|
| posted on 11/1/09 at 09:56 PM |
|
|
quote:
Originally posted by Triton
Diagonal measurement?
Mark
no. i didnt explain that very well.
plumb line down from rearmost part of seat(headrest?) to floor. then measurement from that point to front edge of seat.
trying to work out how far forward the front of the seat will be
problem i have is my tunnel seems to have been altered from standard and is a bit wider so leaving less room for seats
|
|
|
Triton
|
| posted on 14/1/09 at 04:29 PM |
|
|
Headrest height is 825mm then measurement to front edge of seat is 715mm.
Cheers,
Mark
My Daughter has taken over production of the damn fine Triton race seats and her contact email is emmatrs@live.co.uk.
www.tritonraceseats.com
www.hairyhedgehog.com
|
|
|
