f1ngers
|
posted on 25/3/09 at 09:30 AM |
|
|
Harness Bolts
Does anyone have any 7/16" UNF Harness/Seatbelt bolts with the 'top hat' spacers or know where I can get them from?
The 'top hat' spacers are the problem as I can get bolts ok.
I have tried 2 local breakers - one has closed down and the other doesn't keep cars longer than a few days!
Thanks
|
|
|
vinny1275
|
posted on 25/3/09 at 09:54 AM |
|
|
I've had a quick hunt round the usual suspects (rally design, demon tweeks, merlin, etc.), and can't find them - mine came with my
harnesses so might be worth a call to whoever made yours.....
Happy Hunting!
Vince
|
|
blakep82
|
posted on 25/3/09 at 10:03 AM |
|
|
they don't have to be 7/16" though do they? they can be equivalent strength, so i'm sure you can use M12 cap head bolts?
[Edited on 25/3/09 by blakep82]
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
f1ngers
|
posted on 25/3/09 at 10:21 AM |
|
|
The bolts need to be 7/16" UNF as the nuts are already welded into the chassis (Stuart Taylor). The harnesses are Willans (bought on here) and
came with eye bolts for the clip on ends at the top but no bolts/top hats for the bottom.
I looked on the Willans website and they do a Lotus Elise Fitting Kit which might do the job but there are no dimensions. I will send them an email
for advice.
|
|
nib1980
|
posted on 25/3/09 at 10:39 AM |
|
|
I might be able to get some, what size top hat do you need?
|
|
M$RK_VXRD
|
posted on 30/3/09 at 12:39 AM |
|
|
i had the same problem, no bolts with my harnesses in the end i had the bolts made up at work and bought the eye bolts off the net mate
|
|
simon chapman
|
posted on 10/4/09 at 09:09 PM |
|
|
harness bolts
hi , got plenty of the bolts in various lengths ,will have to look for the tophats ,just had to buy tap for making weld in tubes for roll bar if you
need some let me know
|
|