speedyxjs
|
| posted on 17/5/09 at 04:58 PM |
|
|
Seat mount problem
Was going to mount the seats today but ran into a problem.
The seats i have are on runners. There is a bolt going through the top runner into the seat and i need a bolt to go through the bottom runner into the
floor.
The problem is that due to the size of the head on the top runner bolt, i cant get a very big bolt to go through the bottom. I think the biggest bolt
i have with a small enough head to go under the top runner bolt is M4.
Iv done a crappy paint image to try to help explain it.
ETA - can i cut the bolt that goes into the seat down (take a couple of mm of the top)?
[Edited on 17-5-09 by speedyxjs]
|
|
|
|
|
twybrow
|
| posted on 17/5/09 at 05:01 PM |
|
|
I used
these low profile head bolts. My seat runners are very low profile, and they were a
godsend!
|
|
|
eccsmk
|
| posted on 17/5/09 at 05:09 PM |
|
|
i used these
HTH
more useful link
[Edited on 17/5/09 by eccsmk]
|
|
|
Xtreme Kermit
|
| posted on 17/5/09 at 05:43 PM |
|
|
quote:
Originally posted by eccsmk
i used these
HTH
more useful link
[Edited on 17/5/09 by eccsmk]
Yep that's what mine has. Use these to mount up into the seat and normal 8mm bolts downwards.
|
|
|
