boggle
|
| posted on 14/2/10 at 09:19 PM |
|
|
not sure on postage yet....
just trying to find the ali edging.....took 15mins on the waterjet to cut, although this prototype is from 1.5mm 5083 ali...
folded it on a wooden bench by hand, not ideal, will do the next ones on the press brake....i could do you a pair all tig welded if its easyer for
you?
just because you are a character, doesnt mean you have character....
for all your bespoke parts, ali welding, waterjet, laser, folding, turning, milling, composite work, spraying, anodising and cad drawing....
u2u me for details
|
PLEASE NOTE: This user is a trader who has not signed up for the LocostBuilders registration scheme. If this post is advertising a commercial product or service, please report it by clicking here.
|
|
|
l0rd
|
| posted on 16/2/10 at 12:35 PM |
|
|
It would be good if you could give some more info on the weight of these for the rest of the members.
I believe that they coulld be a lot better than the fibreglass ones.
|
|
|
dan8400
|
| posted on 4/9/15 at 09:01 PM |
|
|
I realise this thread is five years old, but did anything ever come of these seats? Are they available or any drawings?
Thanks
Dan
Hey - That's Journey!!!
|
|
|
mk85
|
| posted on 5/9/15 at 06:11 AM |
|
|
look on ebay there is a guy on there doing custom ones
|
|
|
dan8400
|
| posted on 5/9/15 at 07:14 AM |
|
|
Thanks for the reply. I was really looking for a diagram to make my own.
Thanks
Dan
Hey - That's Journey!!!
|
|
|
Myke 2463
|
| posted on 5/9/15 at 12:49 PM |
|
|
Seats
You have email.
Be Lucky Mike.
|
|
|
