neo2
|
| posted on 28/6/10 at 06:44 PM |
|
|
Blanking up a large bulk head hole with what ??
Hi Guys my MK BEC has a large hole in tunnel where the gear selector shaft goes through but its got no grommet on or anything and needs to be sealed
up to pass scrutineering any idea's what is going to be best to use, needs to be sealed from engine bay see, and flame resistant not fire proff
just flame resistant for a few mins etc....
here is what i need to cover
[Edited on 28/6/10 by neo2]
|
|
|
|
|
JF
|
| posted on 28/6/10 at 07:18 PM |
|
|
Some rubber flaps maybe? Possibly with some welding cloth on the engine side for flame resistance.
|
|
|
scudderfish
|
| posted on 28/6/10 at 07:25 PM |
|
|
How about the brush like draught excluders for letterboxes?
|
|
|
deltron63
|
| posted on 28/6/10 at 07:35 PM |
|
|
dum dum putty should do the job
|
|
|
blakep82
|
| posted on 28/6/10 at 10:35 PM |
|
|
some sort of gear lever gaiter? don't know how fire resistant they are though... or any bits of an old race suit or balaclava?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
