shortcircuit
|
| posted on 28/6/20 at 12:57 PM |
|
|
Scuttle and Dash
Really struggling here as attempting to attach a picture but just bumbling about like Boris
I have uploaded to picture gallery but how to I attach it to my posting?
[Edited on 28/6/20 by shortcircuit]
[img] [/img]
[Edited on 28/6/20 by shortcircuit]
|
|
|
|
|
40inches
|
| posted on 28/6/20 at 01:15 PM |
|
|
Copy and paste the pg code above the photo
 
|
|
|
shortcircuit
|
| posted on 28/6/20 at 01:17 PM |
|
|
Thanks I eventually got there. Still lost, will this strip meet IVA?
|
|
|
Deckman001
|
| posted on 28/6/20 at 02:26 PM |
|
|
The dash needs a radius edge at the bottom, not sure of the exsactly ratio but something like 20mm
Jason
|
|
|
shortcircuit
|
| posted on 28/6/20 at 02:51 PM |
|
|
Thanks for reply. IVA "radius of curvature not less than 19mm or 5mm and be covered with a non-rigid material," I was hoping the trim
would meet the 5mm requirements and was looking for any experience.
|
|
|
mackei23b
|
| posted on 29/6/20 at 01:08 PM |
|
|
The IVA Manual IVA references a non rigid material:
" A "non-rigid material" is a material which has a hardness of less than 50 shore A. For the purposes of this examination it will be
deemed to be a
material which is capable of depression under thumb pressure and when deformed retains a degree of protection against contact with any structure which
it is covering and when released returns to its original form."
50 shore A is about equivalent of a rubber stamp - you can do a quick google to get other comparisons.
It's not to say it could not pass - but reading the description I's say the trim would not compress enough under a thumb pressure
Cheers
Ian
[Edited on 29/6/20 by mackei23b]
|
|
|
shortcircuit
|
| posted on 29/6/20 at 01:38 PM |
|
|
Thanks very much for that informative reply. I am aware of other trims that may be suitable so will continue a search for a solution other than
welding something on.
|
|
|
shortcircuit
|
| posted on 29/6/20 at 07:59 PM |
|
|
How can I add a photo?
""Copy and paste the pg code above the photo""
Where do find that?
|
|
|
Deckman001
|
| posted on 29/6/20 at 09:09 PM |
|
|
|
|
|
.jpg){kind=avatar}
