garage19
|
| posted on 9/2/05 at 01:29 PM |
|
|
Who makes a good dash blank??
I was gonna make my own dash but with summer closing in and time running out I thought i might part with some cash and get another job out of the way
quickly.
So, the question is who makes a good dash blank??
I have an MK Indy but am not too keen on the MK dash with the bit going all the way down to the tunnel in the middle.
I think Mac#1 make a nice carbon one and their customer service is second to none so I might go for that.
Has any had any experience/photos of the Mac#1 dash or others?
Thanks,
Doug.
|
|
|
|
|
DaveFJ
|
| posted on 9/2/05 at 04:19 PM |
|
|
how about this ?
Here
Dave
"In Support of Help the Heroes" - Always
|
|
|
flak monkey
|
| posted on 9/2/05 at 04:29 PM |
|
|
Darren sells the exact same ones £52.50 (in with the bodywork on his site)...evidenty from that supplier.
David
Sera
http://www.motosera.com
|
|
|
Marcus
|
| posted on 9/2/05 at 08:51 PM |
|
|
Why not make your own? Dead simple, all you need is a 'laminate floor' panel. Lay scuttle on it and draw round the shape, cut it out and
cover with vinyl. Took me 2 hours, start to finish.
Marcus
Marcus
Because kits are for girls!!
|
|
|
locoboy
|
| posted on 10/2/05 at 12:41 PM |
|
|
Marcus,
I think garage wants the correct radius on the bottom too without spending lots of time achieving it.
ATB
Locoboy
|
|
|
Marcus
|
| posted on 10/2/05 at 09:15 PM |
|
|
Prob. right.
Mine passed SVA last year with good old pipe lagging covered in vinyl and 'permanently glued to the bottom of the dash. The
'permanent' bit lasted a few weeks until I ripped it all off and re-covered!
Marcus
Marcus
Because kits are for girls!!
|
|
|
