shortie
|
posted on 20/6/05 at 07:52 PM |
|
|
Seat bolt torque settings
Fitted my seats this evening but was wondering what sort of torque setting I should tighten the bolts to, they are MK GRP seats and I don't want
to over tighten them obviously but just wondered what others have done.
thanks,
Rich.
|
|
|
ned
|
posted on 20/6/05 at 09:45 PM |
|
|
about hand tight on a 3/8 ratchet is what mine are too (mk r500-a-like jobbies). can't see them coming undone. I wouldn't overtighten as
the threads as you say are only in grp. if really worried stick a bit of locktite in rich..
Ned.
beware, I've got yellow skin
|
|
Peteff
|
posted on 21/6/05 at 07:28 PM |
|
|
It's a captive nut in the fibreglass isn't it?. If your bolt's not too long it should be alright to tighten them as the nut should
lock to the seat runner or bearer you are using.
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|