kevano
|
| posted on 4/10/05 at 08:12 PM |
|
|
sill trim/indy blade
anyone know where i can get some trim for my sill and the curved rear arch bit, seen some nice sill protectors from fluke motorsport but they are too
short
|
|
|
|
|
indykid
|
| posted on 4/10/05 at 09:52 PM |
|
|
east anglian horsebox co. for ally extrusion
7m of c7, and 4m of c8, in metre lengths came to £29.79 delivered. i got so much incase i got it wrong, and yes, i've used most of it
it's not rfu, but is fine with a bit of sanding.
tom
|
|
|
indykid
|
| posted on 4/10/05 at 09:57 PM |
|
|
sorry forgot the link
ea horsebox
also found a past post where i slated the quality, but now i see the finished article, i can't fault them, as the two sizes are perfect for
tunnel top, and grp sides if you've got abs internal panels. the mk stuff is too small for sides, and too big for tunnel top, all imho of
course
tom
|
|
|
kevano
|
| posted on 5/10/05 at 02:20 PM |
|
|
so did you use the c7 for the arches and c8 for the sills, is riveting it on ok
|
|
|
DarrenW
|
| posted on 5/10/05 at 02:25 PM |
|
|
I got a pair from Mac#1 ready formed and ready to fit. Nice and easy.
|
|
|
kevano
|
| posted on 5/10/05 at 07:59 PM |
|
|
how much they work out at, would they be ok for my indy
|
|
|
Deckman001
|
| posted on 5/10/05 at 09:21 PM |
|
|
Mk do them as well !! ( I think )
Jason
|
|
|
indykid
|
| posted on 5/10/05 at 09:40 PM |
|
|
c7 for transmission tunnel, c8 for sills and arches.
take some time and mitre the corner between arch and sill though. bending it round looks rough as a bear's arse.
you can just about see it in this pic, along with pat and rob's avons
tom
 
Rescued attachment sill trim.jpg
|
|
|
indykid
|
| posted on 5/10/05 at 09:45 PM |
|
|
this shows the two sizes better
hth
tom
 
Rescued attachment sill trim2.jpg
|
|
|
Avoneer
|
| posted on 5/10/05 at 10:22 PM |
|
|
Never knew you had that pic Tom - it's a good un.
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
indykid
|
| posted on 5/10/05 at 11:16 PM |
|
|
OT i know, but i've got this one as well
hope you like it. don't get too sentimental
tom[pg=]
|
|
|
%20(WinCE).JPG)
