phoenix70
|
posted on 25/10/05 at 07:08 PM |
|
|
Padded Dashboard
Hi,
Currently my Dash is made of a nice piece of Aluminium, and it doesn't have 19mm radius curve on the bottom edge. So I will have to pad it for
the SVA, but I wonder just how little padding will I get away with, the SVA manual is pretty vague about that.
Another thing, any suggestion where I can get material to pad my dash with?
Cheers
Scott
|
|
|
paulf
|
posted on 25/10/05 at 09:00 PM |
|
|
I used some padding about 5mm thick around a 25mm lower dash tube and covered it with vinyl.I used self adhesive neoprene rubber used for industrial
fridge lagging, but camping mat material would work well.
Paul
quote: Originally posted by phoenix70
Hi,
Currently my Dash is made of a nice piece of Aluminium, and it doesn't have 19mm radius curve on the bottom edge. So I will have to pad it for
the SVA, but I wonder just how little padding will I get away with, the SVA manual is pretty vague about that.
Another thing, any suggestion where I can get material to pad my dash with?
Cheers
Scott
|
|
splitrivet
|
posted on 26/10/05 at 09:15 AM |
|
|
I used a camping mat, nice and dense covered with vynil.
Cheers,
Bob
I used to be a Werewolf but I'm alright nowwoooooooooooooo
|
|