Jumpy Guy
|
posted on 19/4/06 at 09:20 PM |
|
|
Sierra handbrake cover..
my handbrake cover is the rigid plastic standard one. I bought a new leather gaiter for it-
how do i get the standard handle and plastic guard off?
it doesnt seem to have any fixings....
|
|
|
fesycresy
|
posted on 19/4/06 at 09:22 PM |
|
|
Pull and twist, put some effort into it
-----------------------------------------------------------------------------------------------------
The sooner you fall behind, the more time you'll have to catch up.
|
|
RazMan
|
posted on 19/4/06 at 09:24 PM |
|
|
I took a pipe wrench to mine - that shifted it
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
Jumpy Guy
|
posted on 19/4/06 at 09:38 PM |
|
|
pull and twist what? the handle?
how do i get the plastic guard offt the lever?
|
|
RazMan
|
posted on 19/4/06 at 09:46 PM |
|
|
Just to clarify - Are you removing the plastic sheath & button to fit an aftermarket one like this? [shield your eyes]
![](/galpreviews/a358313-handbrake.jpg) ![Rescued attachment handbrake.jpg](/gallery/a358313-handbrake.jpg) Rescued attachment handbrake.jpg
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
wilkingj
|
posted on 19/4/06 at 09:46 PM |
|
|
pull and twist the plastic hand grip bit on the handbrake lever / handle.
Its just a tight fit.
1. The point of a journey is not to arrive.
2. Never take life seriously. Nobody gets out alive anyway.
Best Regards
Geoff
http://www.v8viento.co.uk
|
|
indykid
|
posted on 19/4/06 at 09:49 PM |
|
|
i clamped the lever in the vice, then used the open end of a biggish spanner and hammer to belt it off.
just a different approach, but yes, it's just a tight fit.
tom
|
|
Jumpy Guy
|
posted on 19/4/06 at 09:50 PM |
|
|
bling!!!
yeah, ive got the standard handle bit, which i need to remove
But
the rest of the lever is covered in a big plastic shroud, which im assuming i need to remove to fir my new leather gaiter?![](/images//smilies/bigsmile.gif)
|
|
RazMan
|
posted on 19/4/06 at 09:57 PM |
|
|
[bodge mode] If you are really sure you don't want to refit the old cover, hacksaw down one side to loosen it and just wrench it off with a pair
of pliers.
Cheers,
Raz
When thinking outside the box doesn't work any more, it's time to build a new box
|
|
tom windmill
|
posted on 19/4/06 at 10:12 PM |
|
|
Its very tight, just pull and be careful ![](/images//smilies/bigsmile.gif)
|
|
indykid
|
posted on 19/4/06 at 11:32 PM |
|
|
istr mine hinged on a plastic rivet, although that may have been one of the other handbrake levers i tried before settling on the p6 one.
either way, a big screwdriver, and a saw of some sort will shift it.
tom
|
|
stevebubs
|
posted on 20/4/06 at 12:32 AM |
|
|
Topic Highjack
Is it possible to do similar to a Mk II escort handbrake handle?
|
|
Bluemoon
|
posted on 20/4/06 at 08:58 AM |
|
|
I have the same problem. I would like to know if I remove the pastic rivet and cover, will this effect the mechanics of the lever?? (I will keep the
handle an button)..
Cheers
Dan
|
|
Ian Pearson
|
posted on 20/4/06 at 09:46 AM |
|
|
Where did you get the gaiter from?
|
|
Jumpy Guy
|
posted on 20/4/06 at 11:38 AM |
|
|
got it at detilng, cant remember who from....
main question is - if i hack the plastic cover off, will it affect the operation/action...
|
|