Humbug
|
posted on 26/8/06 at 05:47 PM |
|
|
Rattling harness triangles
I've finally got really irritated at the rattlign noise the harness triangle make, especially the passenger one as I usually don't have a
passenger. The harnesses are properly tightened up, but the triangle moves on the spacer thingy.
Fixed it by undoing the bolts and putting a piece of heater hose cut slightly too wide over the spacer. Redo the bolts et voila - the triangles are
now damped by the rubber, but are able to move if necessary.
![](/galpreviews/a420251-2006-08-26 3 ST harness mount noise damper.JPG) ![Rescued attachment 2006-08-26 3 ST harness mount noise damper.JPG](/gallery/a420251-2006-08-26 3 ST harness mount noise damper.JPG) Rescued attachment 2006-08-26 3 ST harness mount noise damper.JPG
|
|
|
rusty nuts
|
posted on 26/8/06 at 05:48 PM |
|
|
Seat belts normally have a wavy washer to stop rattling.
|
|
Humbug
|
posted on 26/8/06 at 05:50 PM |
|
|
My harnesses didn't come with anything like that, just a spacer that the triangle fits over, but is locked down by the bolt. The gap is about
8mm, hence the rattling
|
|