grusks2
|
posted on 16/12/06 at 06:27 PM |
|
|
Fibreglass Seats/Tiger Cat
Im after some seats for my Tiger Cat. But with some many fibreglass seats out there, narrow passengers side area and the 'Pigs Ears'
Has anyone fitted any to a Tiger Cat E1
http://mac1worxbuild.wordpress.com/
forgot my old password so another username doh
|
|
|
oliwb
|
posted on 16/12/06 at 06:39 PM |
|
|
No, but I'd love to know if anyone has also as I'd be interested. When I spoke to Triton he made it sound as if he had successfully
fitted some to a CAT but couldn't guarantee that the ones he sold me would....so in the end I've stuck with the tiger pads....going to get
some intatrims eventually though I think as they seem to be better value!...Oli.
If your not living life on the edge you're taking up too much room!
|
|
iank
|
posted on 16/12/06 at 10:02 PM |
|
|
Is the Cat the same as the Avon in the room department?
If so the ones in this thread -> http://www.locostbuilders.co.uk/viewthread.php?tid=45188
are the Mac#1 seats.
|
|
givemethebighammer
|
posted on 16/12/06 at 10:25 PM |
|
|
yup, got MK seats in mine, You have to cut the subframe to fit around the "pigs ears" then use some fibreglass to put the strength back
where you have cut it away.
![](/galpreviews/a470864-P1040263sm.JPG) ![Rescued attachment P1040263sm.JPG](/gallery/a470864-P1040263sm.JPG) Rescued attachment P1040263sm.JPG
|
|
grusks2
|
posted on 16/12/06 at 11:20 PM |
|
|
Cheers Guys.
I'd been keeping an eye on a new set on ebay £150 well inside santa budget, but they was 385mm wide, to wide for the passengers side. Or well a
bit more saving for some MK ones.
[Edited on 16/12/06 by grusks2]
http://mac1worxbuild.wordpress.com/
forgot my old password so another username doh
|
|