timex
|
 posted on 4/1/07 at 12:33 AM |
|
|
MK seat pics
Can you please post up some pics of your MK seats? Thank`s
|
|
|
|
|
DavidM
|
| posted on 4/1/07 at 12:34 AM |
|
|
But I haven't got any.
Sorry, that didn't really help did it.
David
|
|
|
macnab
|
| posted on 4/1/07 at 01:16 AM |
|
|
no
|
|
|
scottc
|
| posted on 4/1/07 at 01:50 AM |
|
|
quote:
Originally posted by DavidM
But I haven't got any.
Sorry, that didn't really help did it.
David
Is everyone taking everything personally at the moment
|
|
|
DavidM
|
| posted on 4/1/07 at 01:53 AM |
|
|
quote:
Originally posted by scottc
quote:
Originally posted by DavidM
But I haven't got any.
Sorry, that didn't really help did it.
David
Is everyone taking everything personally at the moment
No, how dare you!
|
|
|
ch1ll1
|
| posted on 4/1/07 at 07:57 AM |
|
|
i would but have cobra
|
|
|
mike smith1
|
| posted on 4/1/07 at 09:02 AM |
|
|
Not close up but haven't got acess to the others at the min.
HTH Mike.jpg)
|
|
|
macnab
|
| posted on 4/1/07 at 09:08 AM |
|
|
oh, look what you've done with the grill...
very smart, I looked at the MK one last night and decided not to fit it for the SVA cos its so sharp, but I could do it like yours, cool.
have to say though your worse than me at putting pictures on the site! ahh given up on the super closeup he he
[Edited on 4/1/07 by macnab]
|
|
|
mike smith1
|
| posted on 4/1/07 at 09:12 AM |
|
|
quote:
Originally posted by macnab
oh, look what you've done with the grill...
very smart, I looked at the MK one last night and decided not to fit it for the SVA cos its so sharp, but I could do it like yours, cool.
have to say though your worse than me at putting pictures on the site!
[Edited on 4/1/07 by macnab]
It is only 9:10 am i dont wake up untill at least 12!
Yeah real simple mesh covering and some trim edging like you use on the front huggers to cover the cut edge. I'll look for a closer pic later
and try and attach it!!!
Also a good idea to stop larger objects flying into the radiator.
Mike
[Edited on 4/1/07 by mike smith1]
|
|
|
macnab
|
| posted on 4/1/07 at 09:16 AM |
|
|
yeah, it does look good, better than just the MK grill by itself.
I was going to form the mesh last night over some plywood but then I remembered I’d broken the jig saw, permanently...
|
|
|
mike smith1
|
| posted on 4/1/07 at 09:19 AM |
|
|
Just marked around the grill on to some cardboard and cut the mesh out with some tin snips, best clean cut i found.
Little bit fiddly getting the rubber trim on the edge because it is quite flimsy but once on i think it looks good.
Mike
|
|
|
macnab
|
| posted on 4/1/07 at 10:13 AM |
|
|
I was wanting to form the mesh round the wood to give it a lip to rivet or screw to the nose cone.
But I'll have a look at what your suggesting, cheers.
|
|
|
mad dad
|
| posted on 4/1/07 at 10:31 AM |
|
|
There is a picture of my seats in my archive if its of interest Cheers
|
|
|
Pezza
|
| posted on 4/1/07 at 10:39 AM |
|
|
I stuck my cheque in the post today for a pair, i'll pop up some pics when i've got them if no one else has by then.
Ben
You couldn't pwn your way out of a wet paper bag, with "PWN ME!!" written on it, from the "pwned take-away" which originally contained one
portion of chicken tikka pwnsala and the obligatory free pwnpadom.
|
|
|
mike smith1
|
| posted on 4/1/07 at 11:14 AM |
|
|
quote:
Originally posted by macnab
I was wanting to form the mesh round the wood to give it a lip to rivet or screw to the nose cone.
But I'll have a look at what your suggesting, cheers.
Good old tie raps, the grill is that good a fit in my nose cone it would of been impossible to form the mesh around it, however i'm sure there
will be some difference in each nose cone.
Mike
|
|
|
timex
|
| posted on 4/1/07 at 04:48 PM |
|
|
There is a section called Bodywork & Exterior!!!!!!!!!!!! Thanks for the replys on the MK seats!
|
|
|
soggy 3
|
| posted on 4/1/07 at 05:02 PM |
|
|
Have a look here
http://www.locostbuilders.co.uk/viewthread.php?tid=51139
|
|
|
mike smith1
|
| posted on 5/1/07 at 11:53 AM |
|
|
quote:
Originally posted by timex
There is a section called Bodywork & Exterior!!!!!!!!!!!! Thanks for the replys on the MK seats!
Apologies
|
|
|
.JPG)
