TimC
|
| posted on 19/4/07 at 03:42 PM |
|
|
Steering wheel to boss bolts
What's the best bolt/washer arrangement to use to bolt a race-type wheel to a race-type boss? I like the look of countersunk stainless
allen-heads and 'cup washers' but will this be strong enough?
Ta
TC
|
|
|
|
|
Mal
|
| posted on 19/4/07 at 03:51 PM |
|
|
Steering Wheel Fixings
My Racetech wheel is attached with three M6 button head stainless socket screws on a 50.8mm PCD.
Mal
|
|
|
russbost
|
| posted on 19/4/07 at 04:11 PM |
|
|
Same here.
I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator
headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names
furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours.
http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
Nick Rogers
|
| posted on 19/4/07 at 04:22 PM |
|
|
Mine is fixed with 6 m6 c'sunk allen bolts.
|
|
|
Howlor
|
| posted on 19/4/07 at 08:13 PM |
|
|
If you shear off 6 m6's then that will probably be the least of your worries. Will not be a problem.
Steve
|
|
|
TimC
|
| posted on 20/4/07 at 07:37 AM |
|
|
Nice one chaps.
|
|
|
