DeanF
|
posted on 9/8/07 at 10:08 AM |
|
|
Weather Cover !! Where From ??
Hi.
My Locost has no weather cover or wet gear at all, I want something to put over the cabin area, To keep the inside dry whilst it is parked up (Just
incase i get caught out)
Where is the best place to get one ?
Or should i make my own & if so what is the best material ??
Thanks
Dean
|
|
|
neilj37
|
posted on 9/8/07 at 10:28 AM |
|
|
You could try softbitsforsevens
|
|
shortie
|
posted on 9/8/07 at 10:31 AM |
|
|
Soft bits for sevens are superb (see my archive) but to be quite honest they are a bit far from you and I reckon it's best to get a cover made
to measure.
Rich.
|
|
DeanF
|
posted on 9/8/07 at 11:16 AM |
|
|
Thankyou.
I'll give them a whirl, As they say they have most patterns variations in stock.
Cheers
Dean
|
|
BenB
|
posted on 9/8/07 at 11:31 AM |
|
|
They sure do and their covers are very nice.
Otherwise (without wanting to sound silly) why not go the Locost route and make one.
You can get suitable sewing machines on Ebay for next to no money and the material is cheap as chips....
Certain attraction towards doing the DIY approach as well....
|
|
Surrey Dave
|
posted on 9/8/07 at 12:26 PM |
|
|
................
![](/galpreviews/a601221-hood3sml.jpg) ![Rescued attachment hood3sml.jpg](/gallery/a601221-hood3sml.jpg) Rescued attachment hood3sml.jpg
|
|
JAG
|
posted on 9/8/07 at 01:36 PM |
|
|
I have a silver plastic cover which came from Argos for a ridiculous price - about £2.99 if I remember correctly ![](/images//smilies/bigsmile.gif)
Just be careful fitting it with a hot exhaust
[img][/img]
Justin
Who is this super hero? Sarge? ...No.
Rosemary, the telephone operator? ...No.
Penry, the mild-mannered janitor? ...Could be!
|
|
DeanF
|
posted on 9/8/07 at 03:55 PM |
|
|
quote: Originally posted by JAG
I have a silver plastic cover which came from Argos for a ridiculous price - about £2.99 if I remember correctly ![](/images//smilies/bigsmile.gif)
Just be careful fitting it with a hot exhaust
Thats The Ticket.
I take it those ends are bungeed ??
Cheers
Dean
[img][/img]
|
|
JAG
|
posted on 10/8/07 at 12:03 PM |
|
|
Yep, the cover comes with elasticated cord and plastic hooks at each corner.
I tied a knot in the plastic in a couple of places to make it a better fit.
Justin
Who is this super hero? Sarge? ...No.
Rosemary, the telephone operator? ...No.
Penry, the mild-mannered janitor? ...Could be!
|
|
zetec
|
posted on 19/8/07 at 09:13 PM |
|
|
Few hours and some cheap Ebay vinyl...£10-£20 depending on what type of fasteners you opt for.
![](/galpreviews/a605996-DSCF0142.JPG) ![Rescued attachment DSCF0142.JPG](/gallery/a605996-DSCF0142.JPG) Rescued attachment DSCF0142.JPG
" I only registered to look at the pictures, now I'm stuck with this username for the rest of my life!"
|
|
DeanF
|
posted on 21/8/07 at 10:29 AM |
|
|
Zetec.
Thats pretty damn good, Did you stitch/machine it all yourself ??.
Now then that is the exact same config/layout for mine
How much profit do you want to make ??
[Edited on 21/8/07 by DeanF]
![](/galpreviews/a606577-214388-3.jpg) ![Rescued attachment 214388-3.jpg](/gallery/a606577-214388-3.jpg) Rescued attachment 214388-3.jpg
|
|
zetec
|
posted on 21/8/07 at 08:06 PM |
|
|
Yep, normal domestic sewing machine no probs. Half the battle is getting a good fit so lots of measuring and trying. Start at the screen end and get
that to fit with your fasteners, then get the sides to fit and then do the tricky rear arch section. I could never do this for a living as it would
take me too long...Have a go yourself, the material is cheap so making a mistake is not the end of the world. Make a good paper pattern first, I used
a roll of thick wallpaper lining I had sitting about.
Good luck..
" I only registered to look at the pictures, now I'm stuck with this username for the rest of my life!"
|
|
DeanF
|
posted on 22/8/07 at 08:04 AM |
|
|
Zetec.
Thanks for the reply.
I just noticed your Modified Nose .
Is your Modified nose cone to accomodate the Tall front/Timing cover of the zetec engine ?? I have been wondering what i could do with mine as it does
rub & is forcing the nose cone up slightly in that postion.
Thanks
Dean
quote: Originally posted by zetec
Yep, normal domestic sewing machine no probs. Half the battle is getting a good fit so lots of measuring and trying. Start at the screen end and get
that to fit with your fasteners, then get the sides to fit and then do the tricky rear arch section. I could never do this for a living as it would
take me too long...Have a go yourself, the material is cheap so making a mistake is not the end of the world. Make a good paper pattern first, I used
a roll of thick wallpaper lining I had sitting about.
Good luck..
|
|
zetec
|
posted on 22/8/07 at 01:51 PM |
|
|
My engine sits below the nose by about 1" and is behind the rear of the nose by about the same.
The nose was done because a had a second nose cone with a star crack in the gell coat...and I was looking for something to do.
Also, I do so wish I could have a Cateringvan I thought I would copy theirs .
" I only registered to look at the pictures, now I'm stuck with this username for the rest of my life!"
|
|
autotrader
|
posted on 6/9/07 at 04:51 PM |
|
|
EDIT:
sorry missread sone thing
[Edited on 6/9/07 by autotrader]
|
|
milson
|
posted on 10/9/07 at 06:18 PM |
|
|
just made a tonneau for mine
![](/galpreviews/a615917-P1010024 540x404.JPG) ![Rescued attachment P1010024 540x404.JPG](/gallery/a615917-P1010024 540x404.JPG) Rescued attachment P1010024 540x404.JPG
|
|
milson
|
posted on 10/9/07 at 06:21 PM |
|
|
also made some side screens which stop alot of wind will give them a full test up to donni
![](/galpreviews/a615918-P1010018 540x404.JPG) ![Rescued attachment P1010018 540x404.JPG](/gallery/a615918-P1010018 540x404.JPG) Rescued attachment P1010018 540x404.JPG
|
|