Antnicuk
|
| posted on 12/2/08 at 05:05 PM |
|
|
Wider Dash?
I need a dash for my stylus, but its 1120mm wide and i can seem to find one that will do the job, any ideas.
600 BHP per ton, Stylus Brought back from the dead! Turbo Rotary Powered!
|
|
|
|
|
speedyxjs
|
| posted on 12/2/08 at 05:14 PM |
|
|
Make one?
|
|
|
adithorp
|
| posted on 12/2/08 at 06:20 PM |
|
|
Try CarbonMods. Thiers is 1200mm. Just got one last week. Great service and quality.
http://www.carbonmods.co.uk/showProduct.asp?prodID=90
adrian
|
|
|
Miks15
|
| posted on 12/2/08 at 08:23 PM |
|
|
im with speedy, make one make it personal then
|
|
|
Antnicuk
|
| posted on 13/2/08 at 05:52 AM |
|
|
any tips of how you have made yours would be helpful and what materials you have used.
600 BHP per ton, Stylus Brought back from the dead! Turbo Rotary Powered!
|
|
|
zetec
|
| posted on 13/2/08 at 07:06 AM |
|
|
covered mdf, see photo archive for ideas.
|
|
|
speedyxjs
|
| posted on 13/2/08 at 07:33 AM |
|
|
I havnt made mine yet but il be making it out of wood and covering it
How long can i resist the temptation to drop a V8 in?
|
|
|
02GF74
|
| posted on 13/2/08 at 09:53 AM |
|
|
2 mm aluminium with rolled over bottom edge covered in pvc cloth.
|
|
|
02GF74
|
| posted on 13/2/08 at 09:54 AM |
|
|
.
|
|
|
Antnicuk
|
| posted on 13/2/08 at 11:10 AM |
|
|
thanks guys, when i built a robin hood i made it out of mdf and covered it and it looked good but this car is something quite different to a robin
hood and i wondered if there were any other alternatives that may be a bit lighter.
I like the idea of being able to staple the the vinyl to the mdf at the back rather than just relying on glue which i would have to do if i made it
from ali, although ali would be a bit lighter, carbon lighter still. I'll just have to go on a diet to compensate 
[Edited on 13-2-08 by Antnicuk]
600 BHP per ton, Stylus Brought back from the dead! Turbo Rotary Powered!
|
|
|
Jasper
|
| posted on 18/2/08 at 02:37 PM |
|
|
I used white fascia board left over from my extension build for my stylus, it's VERY light, completely stiff, easy to cut. I'll then cover
it with foam and alcantera, and staple the back....
If you're not living life on the edge you're taking up too much room.
|
|
|
