Stuart_B
|
| posted on 8/5/08 at 06:48 AM |
|
|
rivets
hi all, cut my back panel out last night and marked all the holes to drill, and i am going to drill all the holes today and rivet it up but the
questions is what size rivets and what spacing to do?
thanks
stuart
black mk indy, 1.6pinto on cbr600 bike carb's.
|
|
|
|
|
whitestu
|
| posted on 8/5/08 at 07:52 AM |
|
|
On my plastic one I used large head 5mm rivets about 120mm apart.
stu
|
|
|
Bluemoon
|
| posted on 8/5/08 at 08:31 AM |
|
|
Have a search for example:
http://www.locostbuilders.co.uk/viewthread.php?tid=87513
http://www.locostbuilders.co.uk/viewthread.php?tid=87533
You will get different responses depending on whom you speak to..
For a plastic rear pannel though I would consider rivnuts...
Dan
[Edited on 8/5/08 by Bluemoon]
|
|
|
.jpg)
