dan__wright
|
| posted on 22/8/08 at 01:09 PM |
|
|
7/16 UNF harness bolt
anyone got any of the above or knows somewhere that sells them? destroyed on the the bolts on my harnesses, re-tapped the hole but need another bolt,
got one from merlin motor sports but its only 1" long and is a bit short. once you've got the spacer on.
Thanks.
FREE THE ROADSTER ONE…!!
|
|
|
|
|
BenB
|
| posted on 22/8/08 at 01:25 PM |
|
|
How long do you need? I tend to go to Namrick for things like this but I'm sure I've got a few different length bolts stashed in the
garage if you want....
|
|
|
chrism
|
| posted on 22/8/08 at 01:29 PM |
|
|
Breakers Yard?
Can you not get one from any car that has seatbelts fitted.
----------------------------
A little hard work never killed anyone, but why take the risk!
-----------------------------
|
|
|
dan__wright
|
| posted on 22/8/08 at 01:41 PM |
|
|
probably about 1.5" - 2"
ive found a few places localy that have them but not high tensile.
will give namrick a go
FREE THE ROADSTER ONE…!!
|
|
|
coozer
|
| posted on 22/8/08 at 01:44 PM |
|
|
Get down the scrappy and hunt for a Ka, front ones are ideal and have 8.8 on them, back ones are much longer but surprisingly have no 8.8 on them.
Beware they are a torx fitting tho. Good luck
1972 V8 Jago
1980 Z750
|
|
|
nib1980
|
| posted on 22/8/08 at 07:10 PM |
|
|
send me a U2U, I'll havea look i think i may have something kicking around at work. but i'm away until saturday just so you know.
|
|
|
hillbillyracer
|
| posted on 22/8/08 at 08:07 PM |
|
|
I think every seatbelt bolt has to be a 7/16 UNF no matter the make of car, it's standard set way back in the past.
You just need to find one with the right head, shoulder & length to suit your needs.
|
|
|
mackei23b
|
| posted on 22/8/08 at 09:27 PM |
|
|
try suffolk fasteners, that's where mine came from, very helpful.
Cheers
Ian
|
|
|
.jpg){kind=avatar}
