Pdlewis
|
| posted on 13/3/09 at 06:43 PM |
|
|
Triton Seats SVA
Hi,
How much edge trim have people put on triton seats for the SVA?
Cheers
Build Photo Album
Updated 05/02/2009
|
|
|
|
|
Guinness
|
| posted on 13/3/09 at 06:49 PM |
|
|
I passed at Newcastle with trim right around the front edge, down the sides, then round the top. And round the harness holes.
Mike
|
|
|
flak monkey
|
| posted on 13/3/09 at 07:00 PM |
|
|
quote:
Originally posted by Guinness
I passed at Newcastle with trim right around the front edge, down the sides, then round the top. And round the harness holes.
Mike
Ditto that...
Sera
http://www.motosera.com
|
|
|
asn163
|
| posted on 13/3/09 at 07:21 PM |
|
|
I suppose it depends on which of Tritons seats you have. I passed I Nottingham with trim only around the shoulder harness holes.
HTH
Simon
|
|
|
spud69
|
| posted on 13/3/09 at 07:31 PM |
|
|
I passed at Beverley with the Trition wide seats without any edge trim on, i may be wrong but i'm sure the SVA manual only applies to forward
facing projections where the triton seats are designed to be rear facing.
|
|
|
Pdlewis
|
| posted on 13/3/09 at 07:40 PM |
|
|
Thats what I thought so I have done the sholder holes. My test is at notts so ill leave it at that and have some in my SVA bag in case
Build Photo Album
Updated 05/02/2009
|
|
|
madteg
|
| posted on 13/3/09 at 09:46 PM |
|
|
Mine passed with no trim at all.
|
|
|
Mark G
|
| posted on 13/3/09 at 09:55 PM |
|
|
I'm not planning on trimming mine for sva, but that doens't mean it'll pass. I'm just not going to do it unless they tell me.
|
|
|
Triton
|
| posted on 14/3/09 at 10:52 AM |
|
|
The high sided seats will need something on the exposed front edges for sva but low side with rolled edges shouldn't need it but it comes down
to the tester..harness slots are moulded not cut out after seat is made so nice and thick to get a decent radius..but it comes down to the tester on
the day...like the MOT
My Daughter has taken over production of the damn fine Triton race seats and her contact email is emmatrs@live.co.uk.
www.tritonraceseats.com
www.hairyhedgehog.com
|
|
|
coozer
|
| posted on 14/3/09 at 11:37 AM |
|
|
My low side ones passed with nothing on at all. (Beverley)
1972 V8 Jago
1980 Z750
|
|
|
