Worzey
|
 posted on 14/3/09 at 11:34 AM |
|
|
Cobra Roadster seat - bolt offset.
Looking at replacing my Cobra Roadster seats with some GRP seats.
Can anyone tell me the dimensions/offset of the Cobra seat bolts?
I've taken a crude measurement of 33cm front to back and 29cm side to side with the seats bolted in the car.
However, if a kind LCB who hasn't fitted their Cobra seats yet could give me a more accurate measure it would be apprieciated.
I want to retain the current runners and dont fancy drilling more holes in the floor if I can help it.
Caterham R400
|
|
|
|
|
Daddylonglegs
|
| posted on 14/3/09 at 04:40 PM |
|
|
If someone hasn't come back to you by the time I get out to the barn to measure mine I'll pop it on here 
JB
It looks like the Midget is winning at the moment......
|
|
|
Worzey
|
| posted on 14/3/09 at 06:22 PM |
|
|
JB, If you can get me the measurements that would be great 
Caterham R400
|
|
|
Daddylonglegs
|
| posted on 14/3/09 at 08:42 PM |
|
|
Right, just measured the bolt holes:
Front to back - 330mm
Left to right - 290mm
These are as near as I can measure but should be OK for your needs.
just to be sure, mine are the Cobra Roadsters (the comfy ones )
HTH
JB
It looks like the Midget is winning at the moment......
|
|
|
Worzey
|
| posted on 14/3/09 at 09:32 PM |
|
|
JB - Thanks. They match the crude measurements I got.
I'm going lightweight with my seats - following a winter without any exercise I'm the comfy one now.
Caterham R400
|
|
|
