Avoneer
|
| posted on 17/2/04 at 05:10 PM |
|
|
Green Gauges Speedo
Hi,
Has anyone got a Greengauges speedo and know if it has a white plastic plug on the back for the wires as a pose to terminals? (Just like the rev
counter)
Cheers,
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
|
|
rusty nuts
|
| posted on 17/2/04 at 07:03 PM |
|
|
Green gauges speedo
Can check mine for you ,but it will be saturday afternoon before I can get to the car Rusty
|
|
|
zetec
|
| posted on 18/2/04 at 07:43 AM |
|
|
Mine had a plug with wires connected, just fit to car loom and then plug into speedo.
|
|
|
Ian Pearson
|
| posted on 18/2/04 at 05:32 PM |
|
|
Mine has a white plastic plug.
|
|
|
rusty nuts
|
| posted on 24/2/04 at 09:28 PM |
|
|
green gauges
mine has a small multi plug , also ref your other post about fuel gauge had problem with mine reading incorrectly, removed sender with wires attached
and moved float by hand. found sender was assembled with float upside down even though I had assembled it according to downloaded instructions, nice
instruments. Rusty
|
|
|
Avoneer
|
| posted on 25/2/04 at 04:35 PM |
|
|
Cheers Rusty.
I figured the small box thing out after a bit of head scratching!
Just got to save up for the speedo now. Got all the other dials!
Pat...
No trees were killed in the sending of this message.
However a large number of electrons were terribly inconvenienced.
|
|
|
%20(WinCE).JPG)
.jpg)
