Daddylonglegs
|
| posted on 13/9/11 at 08:46 AM |
|
|
Seat Belt Mounts
I am looking for some 10.9 M12 x 70 Bolts and cant seem to find any other than a box of 50 
I only need 4. I have fitted the upper harness bolts to the tubes through the rollbar and realised that the ones I got I measured without taking into
account the tophat spacers, so the thread doesn't come out of the bottom of the tube so I guess Mr IVA will not be happy?
An extra 10mm will sort it (ooeeer!)
Any good sites chaps?
JB
It looks like the Midget is winning at the moment......
|
|
|
|
|
wicket
|
| posted on 13/9/11 at 09:18 AM |
|
|
Here you go
http://www.margnor-online.co.uk/bolts/10-9bolts-1/m12
If you need them in a hurry better be quick they are going hols 16th to 25th Sept
[Edited on 13/9/11 by wicket]
|
|
|
Daddylonglegs
|
| posted on 13/9/11 at 09:47 AM |
|
|
Thanks chap, but I tried them already. I need fully-threaded bolts, they only do them up to 60mm 
It looks like the Midget is winning at the moment......
|
|
|
foskid
|
| posted on 13/9/11 at 10:09 AM |
|
|
Have you tried www.classicnutsandbolts.com
I found them useful.
Regards,
John.
|
|
|
wicket
|
| posted on 13/9/11 at 10:57 AM |
|
|
Why do you need 10.9 grade, 8.8 grade is fine for belts and harnesses. If 8.8 are OK they have here
http://www.workshopping.co.uk/product/m12-x-75-hex-head-set-screws-high-tensile-grade-88-din933--bzp-pack-25/BC-MSSZ12-75/
|
|
|
Daddylonglegs
|
| posted on 13/9/11 at 11:51 AM |
|
|
quote:
Originally posted by wicket
Why do you need 10.9 grade, 8.8 grade is fine for belts and harnesses. If 8.8 are OK they have here
http://www.workshopping.co.uk/product/m12-x-75-hex-head-set-screws-high-tensile-grade-88-din933--bzp-pack-25/BC-MSSZ12-75/
Oh! I thought that the IVA required 10.9? OK, wrong again then, at least I can expand my search now.
Thanks 
It looks like the Midget is winning at the moment......
|
|
|
