aka Keith
|
| posted on 6/3/15 at 11:17 PM |
|
|
Fixing seats to floor
My current car has seat runners sat on aluminium box square which is then bolted to the floor on the car. I am looking to change the runners and of
course there are different lengths. So can I bolt the runners to the floor of the car, or do I need some form of spreader plate. I have some very
large spread washers I could use, but do I need to put some plate down to
|
|
|
|
|
snapper
|
| posted on 7/3/15 at 07:46 AM |
|
|
For IVA yes load spreading washers
If you've passed IVA still fit load spreaders or seat can flex
Even with load spreading washers if your floor is thin or ally cross bracing is prefered to stop the seat loads pulling the floor, it's not a
nice feeling having the seat move with e G force
I eat to survive
I drink to forget
I breath to pi55 my ex wife off (and now my ex partner)
|
|
|
Ben_Copeland
|
| posted on 7/3/15 at 07:47 AM |
|
|
I bolted my runners directly to the floor but put some steel strip underneath the car just to act as a spreader plate.
Ben
Locost Map on Google Maps
Z20LET Astra Turbo, into a Haynes
Roadster
Enter Your Details Here
http://www.facebook.com/EquinoxProducts for all your bodywork needs!
|
|
|
aka Keith
|
| posted on 7/3/15 at 08:41 AM |
|
|
Cheers gents, many thanks for the replies.
Cheers
Craig
|
|
|
