40inches
|
| posted on 18/2/20 at 12:23 PM |
|
|
T7 design compact heater
Has anyone fitted one of these, are they any good?
|
|
|
|
|
Mr Whippy
|
| posted on 18/2/20 at 12:37 PM |
|
|
I bought the fan if that's any help 
Well made and powerful, had the speed resistors built in so that was nice, so only needed a multi position switch, I have a spare now transit heater
resister if anyone wants one...?
|
|
|
lsdweb
|
| posted on 18/2/20 at 03:08 PM |
|
|
I had one fitted in my sprint / hillclimb MGZR - it was the simple one and plumbed into the windscreen vents only. It did a good job of demisting
(despite the amount of water that leaked in to that thing!) . Not much use for heating the car. I'll be looking to buy another one for the
current car.
Wyn
|
|
|
Badger_McLetcher
|
| posted on 18/2/20 at 08:55 PM |
|
|
Got one in mine just for windscreen; haven't used it in anger yet, but it seems to do a pretty fair job of blowing hot air!
If disfunction is a function, then I must be some kind of genius.
|
|
|
femster87
|
| posted on 18/2/20 at 09:32 PM |
|
|
quote:
Originally posted by 40inches
Has anyone fitted one of these, are they any good?
Make one, it is a pc cooling fan radiator, I 3d printed all the rest of the gubbing on mine. I got some ridiculously powerful case fans and stuck it
all together. works fine
|
|
|
40inches
|
| posted on 18/2/20 at 10:17 PM |
|
|
quote:
Originally posted by femster87
quote:
Originally posted by 40inches
Has anyone fitted one of these, are they any good?
Make one, it is a pc cooling fan radiator, I 3d printed all the rest of the gubbing on mine. I got some ridiculously powerful case fans and stuck it
all together. works fine
Mmm! I have a redundant PC radiator and a 120mm high output fan somewhere.I'll have a look around the garage.
Thanks Femi 
|
|
|
ken555
|
| posted on 18/2/20 at 10:30 PM |
|
|
quote:
Originally posted by femster87
quote:
Originally posted by 40inches
Has anyone fitted one of these, are they any good?
Make one, it is a pc cooling fan radiator, I 3d printed all the rest of the gubbing on mine. I got some ridiculously powerful case fans and stuck it
all together. works fine
Ex Dell server fan and a PC radiator was the way I went also.
If you look at the pictures carefully, you can see the model number on it.
|
|
|
lsdweb
|
| posted on 20/2/20 at 04:08 PM |
|
|
Ken. Could you post that photo in another way please as I can't see it on Photobucket. Thanks.
Wyn
|
|
|
ken555
|
| posted on 20/2/20 at 05:56 PM |
|
|
try this
[Edited on 20-2-20 by ken555]
|
|
|
lsdweb
|
| posted on 20/2/20 at 10:00 PM |
|
|
Thanks!
|
|
|
