nick205
|
| posted on 26/2/06 at 03:07 PM |
|
|
hole saw sizes
Are hole saws readily available in 54 and 82mm diameters?
I'm fitting ETB 80 52 and 80mm gauges to my dash.
Cheers
Nick
|
|
|
|
|
omega 24 v6
|
| posted on 26/2/06 at 03:20 PM |
|
|
You can see whats available here mate.
http://www.starrett.co.uk/downloads/saws/hole_saws/starrett_general_hole_saws_specs.pdf
|
|
|
Nick Skidmore
|
| posted on 26/2/06 at 03:36 PM |
|
|
Use the 52mm and 80mm hole saws that are available.
They are sized to give clearance over their nominal sizes so your gauges will fit through the holes you drill with a 52mm and a 80mm hole saws.
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
Aboardman
|
| posted on 26/2/06 at 03:52 PM |
|
|
you need one of these
http://cgi.ebay.co.uk/ADJUSTABLE-HOLE-CUTTER-BIT-LIKE-HOLE-SAW_W0QQitemZ4442172325QQcategoryZ632QQssPageNameZWDVWQQrdZ1QQcmdZViewItem
|
|
|
omega0684
|
| posted on 26/2/06 at 04:13 PM |
|
|
dont you need to cut the holes a little bigger to allow for th evinyl or leather that needs to go through?
Alex
I love Pinto's, even if i did get mine from P&O!
|
|
|
britishtrident
|
| posted on 26/2/06 at 04:54 PM |
|
|
Hole saws always wobble and cut a slightly bigger hole than the nominal size.
|
|
|
nick205
|
| posted on 26/2/06 at 07:44 PM |
|
|
cheers guys - checked what sizes my dad had at work and found a 50, 51 & 52 so will try all 3 and see which gives the best fit. Will have to buy
a larger one though.
|
|
|
