TimC
|
posted on 20/4/06 at 05:54 PM |
|
|
Fitting a Kart Steering Wheel
This might sound daft, but has anyone got any idea how you would go about fitting this?:
It's pre-drilled abd the holes look similar to those on a single seater style hub adapter but upside-down.
Can't find anything online i.e Kart bosses.
Any ideas?
Ta
|
|
|
Fred W B
|
posted on 20/4/06 at 07:51 PM |
|
|
I ordered a Wilwood quick release hub from the US, and aftre just a little fileing my kart wheel bolted straight on. The wilwood hubs comes with a hex
drive stub, that you weld on.
link here to hub from summit racing at 25 USD - about 15
UKP.
Cheers
Fred W B
![](/galpreviews/dash front.jpg) ![dash front](/gallery/dash front.jpg) dash front
[Edited on 20/4/06 by Fred W B]
[Edited on 20/4/06 by Fred W B]
|
|
locostv8
|
posted on 12/6/06 at 06:38 PM |
|
|
I would look at a Momo hub and redrill the wheel if needed then make a nice shiny plate to cover the old holes.
http://wrangler.rutgers.edu/gallery2/v/7slotgrille/hssss/
|
|