rossymond
|
posted on 3/10/09 at 04:12 PM |
|
|
Fireblade temp sensor
Hi all, the temp gauge of my blade engine isnt working can someone point me in the direction of the location of the sensor i cant spot it in the bay,
many thanks.
|
|
|
mackei23b
|
posted on 3/10/09 at 04:33 PM |
|
|
Mines on the thermostat housing, top of the engine by one of the cooling hoses.
Cheers
Ian
|
|
Dangle_kt
|
posted on 3/10/09 at 04:35 PM |
|
|
It's on the thermostat housing on the old blade lumps, so look for the top large bore pipe and it's a small nipple next to it, like a male
bullet connection. Give it a good clean first as a bad connections means the gaugue won't work.
EDIT for mistake
[Edited on 4/10/09 by Dangle_kt]
|
|
rossymond
|
posted on 3/10/09 at 06:00 PM |
|
|
many thanks guys.
|
|
mark chandler
|
posted on 3/10/09 at 08:36 PM |
|
|
"water pump housing " read thermostat housing.
I have never managed to get one out whole, they just shear off.
Regards Mark
|
|