tul214
|
| posted on 28/11/09 at 05:20 PM |
|
|
Fixing Seat Pads
I have the foam pads from JK Composites and have tried fixing them to the f/g seats but the Evo Impact stuff does not seem to want to know. Is it just
too cold outside?
What have you guys used?
Cheers,
Mark
1.6 Raw Super6 sold
|
|
|
|
|
mangogrooveworkshop
|
| posted on 28/11/09 at 05:32 PM |
|
|
Try these guys
Or Martin aka Motorliera
|
|
|
jacko
|
| posted on 28/11/09 at 05:34 PM |
|
|
Velcro the stuff that has glue on it
I would get you some if i was at work
Graham
|
|
|
tul214
|
| posted on 28/11/09 at 05:48 PM |
|
|
quote:
Originally posted by mangogrooveworkshop
Try these guys
Oh yes...thats helpful!
Jordan and Keith (JK) advised Evo when I collected my seats but it does not seem to want to work today. That is why I have asked on this forum for any
alternative suggestions.
Thanks anyway.
1.6 Raw Super6 sold
|
|
|
cd.thomson
|
| posted on 28/11/09 at 05:51 PM |
|
|
lol my friends get so riled when I lmgtfy them
Craig
|
|
|
jacko
|
| posted on 28/11/09 at 05:55 PM |
|
|
Mark are you letting the evo dry before putting the 2 parts together?
|
|
|
tul214
|
| posted on 28/11/09 at 06:00 PM |
|
|
Jacko,
Yes, I left it about 10 mins and even tried the heat gun on it!!!
1.6 Raw Super6 sold
|
|
|
Chippy
|
| posted on 28/11/09 at 11:14 PM |
|
|
Fibre glass always has release wax on it, give the area that you want to stick to a good going over with some asetone, celulose thinners, W,H,Y, to
get it of, then lightly abrade with some fine wet and dry. HTH Ray
To make a car go faster, just add lightness. Colin Chapman - OR - fit a bigger engine. Chippy
|
|
|
vinnievector
|
| posted on 29/11/09 at 12:14 PM |
|
|
double sided tape
Double sided tape works well ,use the floor type cheaper .
have you any pics of your seat pads as i would like to get a set .
cheers Vin
|
|
|
jacko
|
| posted on 29/11/09 at 06:08 PM |
|
|
quote:
Originally posted by vinnievector
Double sided tape works well ,use the floor type cheaper .
have you any pics of your seat pads as i would like to get a set .
cheers Vin
 
Sample fitted
This is whats in Mark's archives + more
|
|
|
tul214
|
| posted on 29/11/09 at 08:56 PM |
|
|
The black pads are on the sample seat that JK lent me to see which seat fitted my Tiger.
I have gone for the yellow pads as per their website;
 
pads
1.6 Raw Super6 sold
|
|
|
