Gav
|
posted on 8/2/10 at 06:56 PM |
|
|
Guess the thread
I have a setup station for 1/8 nitro buggy that does toe and camber, managed to sher off one of the crapy soft ally threads that bolt it all
together.
Went to my local nut&bolt place this morning and the closest thing he had to to it was a 4BA size, i would say its inbetween M3 and M4.
Its only a tad bit smaller than the 4BA with a very very slightly finer pitch.
Any ideas?
[Edited on 8/2/10 by Gav]
|
|
|
Confused but excited.
|
posted on 8/2/10 at 07:06 PM |
|
|
3.5mm?
Try one out of a switch/socket cover, these are 3.5mm.
[Edited on 8/2/10 by Confused but excited.]
Tell them about the bent treacle edges!
|
|
Howlor
|
posted on 8/2/10 at 07:06 PM |
|
|
quote: Originally posted by Confused but excited.
3.5mm?
Light switch screws / electrical box. If it helps.
|
|
Confused but excited.
|
posted on 8/2/10 at 07:09 PM |
|
|
Bugger, must type faster.
Tell them about the bent treacle edges!
|
|
Gav
|
posted on 8/2/10 at 07:34 PM |
|
|
Yeah the ones out of light switches are 4BA apparently
|
|
need4speed
|
posted on 8/2/10 at 07:41 PM |
|
|
It's possible I may be able to find some at work tomorrow, I'll check to see and let you know.
Dave
|
|
daviep
|
posted on 8/2/10 at 10:32 PM |
|
|
Sounds like M3.5, which is 3.5mm x 0.6mm pitch compared to 4ba which is 3.9mm x 0.66mm
Try model suppliers such as THIS
Davie
|
|
Gav
|
posted on 8/2/10 at 10:55 PM |
|
|
Thanks davie i'll give that a try.
|
|
flak monkey
|
posted on 9/2/10 at 07:18 AM |
|
|
For reference:
http://www.engineeringtoolbox.com/metric-threads-d_777.html
As already said its probably M3.5 x 0.6 pitch.
I thought all electrical stuff was still 4BA? Or have they finally made the change to metric?
Sera
http://www.motosera.com
|
|
need4speed
|
posted on 9/2/10 at 08:49 AM |
|
|
Sorry checked but no luck, have M2,2.5,3 & 4 but not 3.5
Cheers,
Dave
|
|
Gav
|
posted on 9/2/10 at 09:45 AM |
|
|
Thanks anyway
|
|