Arthur T wareing
|
| posted on 16/5/11 at 02:27 PM |
|
|
wheel studs
Hi All sent for my spacers and longer wheel studs I have knocked them out in the past but my luck has't been very good lately and I'm
thinking of pushing them out with a g clamp or ball joint tool any ideas would be welcome thank for all your help in the past. regards Arthur
|
|
|
|
|
Miks15
|
| posted on 16/5/11 at 03:07 PM |
|
|
i would get a socket on the back of the hub over the head of the bolt, then, with the nut on so you dont damage the threads, put a gclamp on and press
them out
|
|
|
big_wasa
|
| posted on 16/5/11 at 06:44 PM |
|
|
I pushed mine out with a ball joint spliter.
|
|
|
britishtrident
|
| posted on 16/5/11 at 06:51 PM |
|
|
Just screw a nut and tap the nut with 0.5kg hammer --- use a lump of wood between the nut and the hammer.
[I] “ What use our work, Bennet, if we cannot care for those we love? .”
― From BBC TV/Amazon's Ripper Street.
[/I]
|
|
|
