Kartdad
|
posted on 14/9/11 at 05:19 PM |
|
|
Are gear lever extensions any good?
Hi all
I am not sure how far back I can get the Zetec into the chassis, I wondered if any one had fitted one of these and had any opinions/ experience?
WESTFIELD CATERHAM 7 DAX LOCOST GEARLEVER EXTENSION | eBay
many thanks
KD
Also how to paste links?
|
|
|
Lightybob
|
posted on 14/9/11 at 06:11 PM |
|
|
Hi,
I recently bought an extension and quick shift from Ebay, it works but the change is not as good as it should be, I also had problems with the support
shaft welding failing, which I have repaired.
There was a recent blogg on this forum regarding the issues with poor gear selection from gear extensions, it was mentioned that the unit supplied
from Westfield was the best.
Hope this helps
Regards David
|
|
rusty nuts
|
posted on 14/9/11 at 06:28 PM |
|
|
Have a look at David Jenkins website , it shows how to make one complete with quickshift that could easily be modified to alter the distance that it
moves the gear lever backwards . I made mine from a few bits out of the scrap bin and fitted a new saddle for the selector shaft for the grand total
of £0.92 , works a treat with a nice positive change. IIRC someone posted a link to Davids site in the last few days
|
|
karlak
|
posted on 14/9/11 at 06:31 PM |
|
|
Here ya go -
http://www.locostbuilders.co.uk/viewthread.php?tid=160676
MK Indy - 2litre Duratec - Omex 600 - Jenvey throttle bodies - ETB DigiDash2
|
|