carlknight1982
|
posted on 18/4/12 at 10:43 AM |
|
|
exhaust cut out shield.
im looking to get a stainless/shiny piece of steel to cover the edge of the cut out in my bonnet around my exhaust
Any idea of a place that can do this for me ?
Carl
Logic will get you from a A to B
Imagination will take you everywhere.
|
|
|
Not Anumber
|
posted on 18/4/12 at 11:28 AM |
|
|
Most people working with sheet metal should be able to do this for you. The toughest thing is marking it out prcisely for them to make the cuts in
the right place.
Will you be fitting the plate to the bodywork with a large margin around the pipes for movement or tight fitting it to the pipes independant of the
bodywork ?
|
|
chris_harris_
|
posted on 18/4/12 at 01:48 PM |
|
|
If you know what you want, and have access to cad then there is a chap on here who does water jet cutting of pretty much anything you want.
Can't recall his name though, sorry.
Chris
Regards Chris
|
|
loggyboy
|
posted on 18/4/12 at 01:51 PM |
|
|
quote: Originally posted by chris_harris_
If you know what you want, and have access to cad then there is a chap on here who does water jet cutting of pretty much anything you want.
Can't recall his name though, sorry.
Chris
andyw7de
|
|
Chippy
|
posted on 18/4/12 at 03:48 PM |
|
|
I have emailed Andy drawings, with the measurements on, just done on plain paper. Never had to use CAD, and they arrived exactly as requested. HTH Ray
To make a car go faster, just add lightness. Colin Chapman - OR - fit a bigger engine. Chippy
|
|
chris_harris_
|
posted on 18/4/12 at 09:00 PM |
|
|
That's good to know for future then. I have Only ever asked for round or square items as they are clearly easier to setup. will try a drawing
next time then.
Chris
Regards Chris
|
|