RichardRichard
|
| posted on 12/6/13 at 09:09 AM |
|
|
Steel Flat Packs
Hi Guys
Who's best to buy the steel pre cut from for the haynes chassis, I have emailed two people who allegdley supply from recomendations on here and
neither has come back to me  My young 'un is bugging me now to get the steels ordered and start welding!
Any help appreciated, worst case I'll have to buy in 3 metre lengths and cut myself 
Cheers
Rich
Planning to start own Haynes with my 11 year old (his idea!)
|
|
|
|
|
Daddylonglegs
|
| posted on 12/6/13 at 09:17 AM |
|
|
There must be plenty of steel merchants in the midlands? I would think you could probably get most of the shorter pieces as offcuts then just buy the
long bits 
But then I am a skin-flint
It looks like the Midget is winning at the moment......
|
|
|
ReMan
|
| posted on 12/6/13 at 09:29 AM |
|
|
Yes but theres a lot to be said for pre-cut.
That's how I'd buy it for my next one, I dont see any pleasure in hacksawing
www.plusnine.co.uk
|
|
|
Slimy38
|
| posted on 12/6/13 at 09:40 AM |
|
|
I went for 3 metre lengths of steel, I didn't like the idea of only having the fixed amount of steel if anything needed to be replaced or
improved on. It also cost a quarter of a pre-cut kit.
Camp Steel in Birmingham is the place to go.
|
|
|
Ben_Copeland
|
| posted on 12/6/13 at 09:47 AM |
|
|
Equinox will be doing flat packs shortly. Just trying to get hold of Dave to find out if they are ready or not.
Ben
Locost Map on Google Maps
Z20LET Astra Turbo, into a Haynes
Roadster
Enter Your Details Here
http://www.facebook.com/EquinoxProducts for all your bodywork needs!
|
|
|
theduck
|
| posted on 12/6/13 at 11:26 AM |
|
|
As above, camp steel are the best place to go and their "off cuts" are rather long!
|
|
|
Not Anumber
|
| posted on 12/6/13 at 11:30 AM |
|
|
Phil at Talon has been doing these fr the Haynes for several years Contact talonmotorsport@hotmail.co.uk
ONLINE SHOP http://www.talonmotorfabrication.co.uk
|
|
|
RichardRichard
|
| posted on 12/6/13 at 11:40 AM |
|
|
quote:
Originally posted by Not Anumber
Phil at Talon has been doing these fr the Haynes for several years Contact talonmotorsport@hotmail.co.uk
ONLINE SHOP http://www.talonmotorfabrication.co.uk
I tried Phil as he came highly recomended but had no response.
Planning to start own Haynes with my 11 year old (his idea!)
|
|
|
RichardRichard
|
| posted on 12/6/13 at 11:41 AM |
|
|
quote:
Originally posted by Ben_Copeland
Equinox will be doing flat packs shortly. Just trying to get hold of Dave to find out if they are ready or not.
Thanks Mate, please let me know.
Planning to start own Haynes with my 11 year old (his idea!)
|
|
|
Not Anumber
|
| posted on 12/6/13 at 11:55 AM |
|
|
You may have caught Phil whilst he was on holiday. He is back now, posting on forums yesterday,
|
|
|
Talon Motorsport
|
| posted on 12/6/13 at 01:34 PM |
|
|
Just been through my emails and my spam folders I can't find any new messages......
|
|
|
RichardRichard
|
| posted on 12/6/13 at 02:19 PM |
|
|
quote:
Originally posted by Talon Motorsport
Just been through my emails and my spam folders I can't find any new messages......
Messaged you on ebay mate..........
Planning to start own Haynes with my 11 year old (his idea!)
|
|
|
