Dave Bailey
|
| posted on 3/3/14 at 07:20 PM |
|
|
Luke Harness Problem
So... looking for a bit of inspiration... I have looked at this for a while but nothing jumps out! Just fitted my new JK composite seats and the
belt adjusters aling perfectly with the side of the seat so get wedged down the side between the seat and the tunnel... There is one adjuster per side
that is fixed to the strap part that bolts into the chassis. I spoke with Luke today and the short section bolted to the car is 8" long and
apparently is the shortest it can be. Not sure if they do an adjuster that has the part that bolts to the car integrated so no belt in this bit. Other
option is to extend the fixed length a bit so that it comes through the side of the seat but I am a bit worried that this will result in either being
uncomfortable or wrecking the seat with my wide bum.... Anyone got an experiences they can share?
Hopefully this made sense....
Thanks
Dave B
|
|
|
|
|
daveb666
|
| posted on 4/3/14 at 02:47 PM |
|
|
My adjusters sit in the same position (all be it JUST inside the seat itself). Mine are OK when I'm driving and I never have need to move my lap
belts anyway.
[Edited on 4/3/14 by daveb666]
2007bc Photography - Commercial and Wedding Photographer based in West Yorkshire
http://www.2007bc.co.uk / http://www.huddersfieldcommercialphotographer.co.uk
|
|
|
Coopz
|
| posted on 4/3/14 at 03:54 PM |
|
|
Sorry not on topic, but in your pick dave, what carpet have you used on your rear bulkhead?
Cheers Toby
|
|
|
daveb666
|
| posted on 4/3/14 at 04:37 PM |
|
|
MegaVanMats - Anthracite, not stretchy. Some more pics in 'interior' folder of my photo archive.
2007bc Photography - Commercial and Wedding Photographer based in West Yorkshire
http://www.2007bc.co.uk / http://www.huddersfieldcommercialphotographer.co.uk
|
|
|
