TimC
|
| posted on 8/4/18 at 05:48 PM |
|
|
Best edge trim for tight radius and 1.2mm panel
Hi all,
Anyone recommend anything specific to basically act like an open grommet on a 40-odd mm hole in an aluminium panel?
Ta
[Edited on 8/4/18 by TimC]
|
|
|
|
|
James24785
|
| posted on 8/4/18 at 07:57 PM |
|
|
I've got some quite small rubber "U" trim I've used on mine. Can send ya bit thru the post to try?
|
|
|
obfripper
|
| posted on 8/4/18 at 09:33 PM |
|
|
VW part 1J0827417 is a 2 part blanking plug that would probably do the trick, it's approx 40-50mm off hand.
From a mk4 golf, mk5 polo and all the related cars.
Dave
|
|
|
harmchar
|
| posted on 8/4/18 at 09:41 PM |
|
|
There's stuff on eBay called Neoprene blow hole rubber.
Any use?
|
|
|
TimC
|
| posted on 9/4/18 at 09:50 AM |
|
|
quote:
Originally posted by harmchar
There's stuff on eBay called Neoprene blow hole rubber.
And the same to you!
Thanks all,
|
|
|
