piddy
|
| posted on 10/4/06 at 07:19 PM |
|
|
Injector electrical plugs
Does anyone know of a supplier of the plugs that fit on to the injectors on GSXR throttle bodies?
I see that one of the electrial supplier do several types but Its hard to tell if any are the correct ones.
|
|
|
|
|
blockhead_rich
|
| posted on 10/4/06 at 07:43 PM |
|
|
I also need some for the 4AGE 16v injectors too if any one can help us both out.
Rich
|
|
|
omega 24 v6
|
| posted on 10/4/06 at 08:08 PM |
|
|
Can you post a photo of what they look like ??
|
|
|
stevec
|
| posted on 10/4/06 at 08:18 PM |
|
|
Please post photo of toyota ones, I may be able to help.
Steve,
|
|
|
Rubin
|
| posted on 10/4/06 at 08:47 PM |
|
|
i'm also after a set for a 16v 4Age - came without from Raw and they have not been able to supply.
Any ideas where to source them would be very welcome
|
|
|
lsdweb
|
| posted on 10/4/06 at 08:51 PM |
|
|
Try here
NTDWM 
Wyn
|
|
|
blockhead_rich
|
| posted on 10/4/06 at 09:47 PM |
|
|
The ones I'm after are wiring type "F" on the attached link, oh and I'm also after the injectors that have a flow rate greater
or equal to 250cc
http://www.geocities.com/MotorCity/Pit/9975/dataBySubject/Injectors.html?20064[/url]
Rich
|
|
|
Dusty
|
| posted on 10/4/06 at 11:11 PM |
|
|
For what it's worththese are my GSXR plugs and injectors.
 
Rescued attachment DSCN0603.jpg
|
|
|
tks
|
| posted on 11/4/06 at 11:15 AM |
|
|
Watchout for flow measures!
They aren´t that flexible!
if you say you want something greater then 250cc min.. it would deffo mean that 350 would be usefull!
the larger the injector, the bigger is the minimum sprayed quantity sow your idle can become a problem!!
Search for duty cycle to untherstand me...
Tks
The above comments are always meant to be from the above persons perspective.
|
|
|
piddy
|
| posted on 13/4/06 at 07:55 PM |
|
|
Thanks again ISDWEB.
ordered four yesterday received them today.
|
|
|
