chockymonster
|
| posted on 2/11/06 at 02:03 PM |
|
|
RT+ Cycle wing mounts
Does anyone have any pictures of how the cycle wings mount to the uprights?
Mine just don't seem to line up with a pair of holes.
 
upright cyclewing 1
 
upright cycle wing 2
PLEASE NOTE - Responses on Forum Threads may contain Sarcasm and may not be suitable for the hard of Thinking.
|
|
|
|
|
MikeR
|
| posted on 2/11/06 at 03:17 PM |
|
|
are yours ones for cortina uprights or the raceleda uprights? think they have slightly different spacing. Might be worth a quick email to mark.
|
|
|
amalyos
|
| posted on 2/11/06 at 03:47 PM |
|
|
Looks to me like you have a Sierra upright bracket rather than a Cortina.
Bracket should look like this (see pic).
Steve
 
Rescued attachment Cycle wing bracket.JPG
|
|
|
chockymonster
|
| posted on 2/11/06 at 03:55 PM |
|
|
quote:
Originally posted by amalyos
Looks to me like you have a Sierra upright bracket rather than a Cortina.
Bracket should look like this (see pic).
Steve
I did wonder if I had the sierra ones as they're a bitch to fit around the brake pipe on the raceleda calipers
PLEASE NOTE - Responses on Forum Threads may contain Sarcasm and may not be suitable for the hard of Thinking.
|
|
|
Agriv8
|
| posted on 2/11/06 at 04:08 PM |
|
|
Nope you have defo got raceleada ones ( the two tabs use the same bolts as the steerig arm ).
You need the S type ones.
regards agriv8
Taller than your average Guy !
Management is like a tree of monkeys. - Those at the top look down and see a tree full of smiling faces. BUT Those at the bottom look up and see a
tree full of a*seholes .............
|
|
|
chockymonster
|
| posted on 2/11/06 at 07:06 PM |
|
|
quote:
Originally posted by Agriv8
Nope you have defo got raceleada ones ( the two tabs use the same bolts as the steerig arm ).
You need the S type ones.
regards agriv8
Cheers Iain,
Marc!
PLEASE NOTE - Responses on Forum Threads may contain Sarcasm and may not be suitable for the hard of Thinking.
|
|
|
marc laptop
|
| posted on 2/11/06 at 07:40 PM |
|
|
yep thems raceleda ones , but on the plus side 12 sets of cortina should be arriving tomorrow  although cant garuntee they will arive in time to
send same day best send mail to workshop to remind me in the morning to see if the powder coaters can deliver any earlier
best regards
marc
|
|
|
chockymonster
|
| posted on 2/11/06 at 07:55 PM |
|
|
quote:
Originally posted by marc laptop
yep thems raceleda ones, but on the plus side 12 sets of cortina should be arriving tomorrow although cant garuntee they will arive in time to
send same day best send mail to workshop to remind me in the morning to see if the powder coaters can deliver any earlier
best regards
marc
Cheers Marc,
did Chris you get a chance to look at those seat pictures I sent over?
PLEASE NOTE - Responses on Forum Threads may contain Sarcasm and may not be suitable for the hard of Thinking.
|
|
|
marc laptop
|
| posted on 2/11/06 at 08:06 PM |
|
|
dont know ref seats did you send me an email or chris ??? if its me i dont have it and if its chris he will deal with it
best regards
marc
|
|
|
chockymonster
|
| posted on 12/11/06 at 08:24 PM |
|
|
New stays arrived during the week but I think I'm missing something!
The arch sits a little bit too high
Can another RT+ owner post up a pic of the wing stays so I can figure out what needs changing.JPG)
PLEASE NOTE - Responses on Forum Threads may contain Sarcasm and may not be suitable for the hard of Thinking.
|
|
|
amalyos
|
| posted on 12/11/06 at 08:32 PM |
|
|
You have to cut the brackets down to suit your wheels and tyres.
I found the best way was to fit the wheels, then tape a spacer to the tyre to rest the arch on, then measure how much you need to cut off the
bracket.
Steve.
|
|
|
Krismc
|
| posted on 13/11/06 at 08:15 PM |
|
|
or just stick ya wings on like that.....it will look good i promise
Built, Ivaed, Drove and now Sold - 2011 MNR VORTX RT+ 2000cc Zetec on R1 Throttle boddies.
|
|
|
Winston Todge
|
| posted on 13/11/06 at 09:06 PM |
|
|
quote:
Originally posted by Krismc
or just stick ya wings on like that.....it will look good i promise
Don't believe him!  
|
|
|
chockymonster
|
| posted on 13/11/06 at 09:47 PM |
|
|
quote:
Originally posted by Krismc
or just stick ya wings on like that.....it will look good i promise
You lie!.JPG)
PLEASE NOTE - Responses on Forum Threads may contain Sarcasm and may not be suitable for the hard of Thinking.
|
|
|
Winston Todge
|
| posted on 14/11/06 at 07:55 AM |
|
|
|
|
|
Peteff
|
| posted on 14/11/06 at 10:38 AM |
|
|
You could get your head trapped in there, be careful
yours, Pete
I went into the RSPCA office the other day. It was so small you could hardly swing a cat in there.
|
|
|
marc n
|
| posted on 14/11/06 at 10:56 AM |
|
|
perfect for those 30inch chrome pimp my ride wheels
please email rather than u2u
direct workshop email ( manned 8am till 6pm )
www.mnrltd.co.uk enquireys to :-
chrismnrltd@btinternet.com
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
JoaoCaldeira
|
| posted on 14/11/06 at 10:22 PM |
|
|
LOL LOL LOL
|
|
|
chockymonster
|
| posted on 14/11/06 at 11:38 PM |
|
|
quote:
Originally posted by marc n
perfect for those 30inch chrome pimp my ride wheels
Do you think they'd ruin the handling?
PLEASE NOTE - Responses on Forum Threads may contain Sarcasm and may not be suitable for the hard of Thinking.
|
|
|
