falcor
|
posted on 30/12/07 at 06:14 PM |
|
|
Thread ID ?
Got a thread that I need ID'd.... it's tapered, 10.3 mm at the base and 9.7 mm at the tip and when checked with a thread gauge the gauged
marked "27" fits the threads....
Any ideas what that is?
|
|
|
big_wasa
|
posted on 30/12/07 at 06:21 PM |
|
|
3/8 fpt ?
Looks like I was wrong
[Edited on 30/12/07 by big_wasa]
|
|
Andy W
|
posted on 30/12/07 at 06:22 PM |
|
|
1/8" NPT ?
|
|
bigrich
|
posted on 30/12/07 at 06:24 PM |
|
|
sounds like 1/8 NPT to me
NPT - American Standard Pipe Thread Taper 1)
Pipe Size
(inches) Threads per Inch
TPI - pitch Outside Diameter
OD
(inches)
1/16" 27 0.313"
1/8" 27 0.405" = 10.2 mm
1/4" 18 0.540"
3/8" 18 0.675"
1/2" 14 0.840"
3/4" 14 1.050"
1" 11-1/2 1.315
[Edited on 30/12/07 by bigrich]
A pint for the gent and a white wine/fruit based drink for the lady. Those are the rules
|
|
David Jenkins
|
posted on 30/12/07 at 06:57 PM |
|
|
Unified Cycle Gas thread...
|
|
falcor
|
posted on 30/12/07 at 07:37 PM |
|
|
1/8 NPT, i'll give that a shot. Thanks and Happy New Year !
|
|
Ian D
|
posted on 30/12/07 at 09:25 PM |
|
|
Ive come across that thread too on my Zetec. its used for the sensor which switches the fan in.
Any ideas where I could buy a bolt? I want to hollow it out and fit the temp gauge sensor there. The other sensor on the thermostat housing is being
used for my Webber Alpha kit.
Thanks
Ian
|
|