blakep82
|
| posted on 31/3/08 at 05:38 PM |
|
|
anyone have a 5/8" unf left hand tap to borrow or sell?
i need one so i can get my axle on, seems no-one has any... 
tried my usual www.tapdie.co.uk who are usually very cheap and good quality taps and service, but they don't have any...
its a long shot, i know...
[Edited on 31/3/08 by blakep82]
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
|
|
MustangSix
|
| posted on 31/3/08 at 06:53 PM |
|
|
speedway has them here.
http://www.speedwaymotors.com/p/3106,243_Industrial-Taps.html?itemNo=tap
Wrong side of the pond, but Speedway Motors has great service and may be worth checking out.
|
|
|
iank
|
| posted on 31/3/08 at 07:48 PM |
|
|
Try http://www.tracytools.com/ if you can't borrow one.
--
Never argue with an idiot. They drag you down to their level, then beat you with experience.
Anonymous
|
|
|
blakep82
|
| posted on 31/3/08 at 08:32 PM |
|
|
cheers guys!
that one in america, they don't seem to be unf taps though it might just be a different name for them?
i'll give tracy tools a shot ian! just remembered though, i bought a tap from ben ford paul in glasgow a few years back... might give them a
call tomorrow. they're just up the road
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Mole
|
| posted on 31/3/08 at 09:59 PM |
|
|
http://cgi.ebay.co.uk/5-8-UNF-TAPS-ALL-UNF-LEFT-HAND-TAPS-IN-OUR-SHOP_W0QQitemZ330194337304QQihZ014QQcategoryZ64819QQrdZ1QQssPageNameZWD1VQQ_trksidZp1
638.m118.l1247QQcmdZViewItem
|
|
|
blakep82
|
| posted on 31/3/08 at 11:08 PM |
|
|
why didn't i think of ebay?! 
dude, you're a legend!
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
blakep82
|
| posted on 31/3/08 at 11:21 PM |
|
|
F**KING PAYPAL!
I've got 4 card details on there, new cards the bank have sent me for the same account, new card arrive (old one expired 31st march) and i
can't add the new card or remove the details of the old one because i can only add 4 cards 
sent the details for the one thats just expired and it seems to have accepted it... only a few minutes out i guess. its not going to bounce back is
it? am i right in thinking that paypal debit my card and authorise it when i click pay? its not sent to the seller to then debit tomorrow is it?
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
MustangSix
|
| posted on 1/4/08 at 01:47 PM |
|
|
The ones Speedway list as SAE are what you refer to as UNF. A course thread tap would be called UNC. These are the taps used for rod ends (or heims,
or rose joints).
Britain and the US.....two countries separated by a common language....
|
|
|
blakep82
|
| posted on 1/4/08 at 01:54 PM |
|
|
lol threads confuse the hell out of me... i'm trying to work out a thread on the master cylinder mounts on my car (studs welded to the chassis,
and i can't for the life of me work out what thread they are so i can get the nuts for them. and of course i can't take the chassis
anywhere for someone to work it out for me, and i've got thread gauges, but its not on there.
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
Alan B
|
| posted on 2/4/08 at 01:09 PM |
|
|
Another US source...
www.mcmaster.com
search for 2584A62...$28 about 14 quid
If you are stuck and they wont ship to the UK give me a shout and could probably send it for you.
|
|
|
blakep82
|
| posted on 3/4/08 at 12:16 AM |
|
|
cheers mate, but the one from RDG tools off ebay arrived today, got my axle on
going to start the watts linkage bars tomorrow i think. if only i can remember what i did with my right hand thread 5/8" tap... couldn't
find it today
________________________
IVA manual link http://www.businesslink.gov.uk/bdotg/action/detail?type=RESOURCES&itemId=1081997083
don't write OT on a new thread title, you're creating the topic, everything you write is very much ON topic!
|
|
|
