Triton
|
| posted on 29/4/08 at 09:14 PM |
|
|
Cold air sucker
Airbox that fits across a bank of 4 bike carbs as well as webers..will need flexi pipe to allow airfilter to be mounted where it can suck cold
air...down in the nosecone somewhere I guess
£65.00 as fiddly blighters to make
Cheers,
Mark
My Daughter has taken over production of the damn fine Triton race seats and her contact email is emmatrs@live.co.uk.
www.tritonraceseats.com
www.hairyhedgehog.com
|
|
|
|
|
eccsmk
|
| posted on 29/4/08 at 09:15 PM |
|
|
do you have a piccy??????????????
|
|
|
Triton
|
| posted on 29/4/08 at 09:25 PM |
|
|
Couldn't find the new picture so nicked this from my archive.
Mark
 
Rescued attachment Airbox 2.jpg
My Daughter has taken over production of the damn fine Triton race seats and her contact email is emmatrs@live.co.uk.
www.tritonraceseats.com
www.hairyhedgehog.com
|
|
|
Triton
|
| posted on 29/4/08 at 09:26 PM |
|
|
Umm bit mucky but you get the gist ...
Mark
My Daughter has taken over production of the damn fine Triton race seats and her contact email is emmatrs@live.co.uk.
www.tritonraceseats.com
www.hairyhedgehog.com
|
|
|
worX
|
| posted on 29/4/08 at 09:39 PM |
|
|
What size is the inlet Mark?
Steve
|
|
|
eccsmk
|
| posted on 29/4/08 at 09:44 PM |
|
|
cheers for that
thats yet another reason to spend money
doh
|
|
|
Triton
|
| posted on 29/4/08 at 10:28 PM |
|
|
Inlet will take 2" flexi pipe...but will check in the morning and make sure I didn't dream that up!!!
Mark
My Daughter has taken over production of the damn fine Triton race seats and her contact email is emmatrs@live.co.uk.
www.tritonraceseats.com
www.hairyhedgehog.com
|
|
|
triumphdave
|
| posted on 30/4/08 at 06:46 AM |
|
|
Any chance we could have some overall sizes,is the base plate included?
If you always do what you have always done you will always get what you have always got
|
|
|
Triton
|
| posted on 30/4/08 at 07:32 AM |
|
|
quote:
Originally posted by triumphdave
Any chance we could have some overall sizes,is the base plate included?
Will take some measurements and post them later today...it has a base as part of the box so can be made to fit ....may need to put the
"locost" head on but nowt impossible
Mark
My Daughter has taken over production of the damn fine Triton race seats and her contact email is emmatrs@live.co.uk.
www.tritonraceseats.com
www.hairyhedgehog.com
|
|
|
Mr Whippy
|
| posted on 30/4/08 at 07:34 AM |
|
|
I'm sure I've seen something like that in hospitals but they have another propose there
Fame is when your old car is plastered all over the internet
|
|
|
Kriss
|
| posted on 30/4/08 at 08:40 AM |
|
|
Looks great. Take it this would fit a '03 R1 MK Indy no problems? So do you just need to run a cold air feed 2 inch and attach a cone filter in
the nose cone?
|
|
|
procomp
|
| posted on 30/4/08 at 08:43 AM |
|
|
Hi just remeber if fitting one of those type of air boxes you will need to be re jetting your carb setup too.
cheers Matt
|
|
|
Triton
|
| posted on 30/4/08 at 10:33 PM |
|
|
Better they suck cold air than stuffy old hot air under that 'glass or ali bonnet.
Re jetting will most certainly be needed and would say a rolling road session would be the best bet to get the most out of what you have.
Cone or sock type doodah down in the nose where it can suck cooler fresher air.
Mark
My Daughter has taken over production of the damn fine Triton race seats and her contact email is emmatrs@live.co.uk.
www.tritonraceseats.com
www.hairyhedgehog.com
|
|
|
Roman
|
| posted on 29/7/08 at 03:02 PM |
|
|
3 inches?
Are you able to offer 1 of these with a 3" inlet?
Do you have any dimensions and better pictures?
|
|
|
