rumplitter
|
posted on 12/9/08 at 07:38 AM |
|
|
Designing logo's
Morning all,
Although my build has slowed right down it's giving me the opportunity to look at the minor details that make the car individual. I've
recently designed a log for my MiniMojo and had a sample stitched onto felt, the end product will be on my headrests. I've also designed a
stainless steel binical with a similar logo, once a sample is laser cut I will photograph it and post the results.
Would anyone be interested in getting something similar? utilising my design and CAD skills? Is a market for this type of thing.
What do you all think?
Regards
Patrick
http://www.locostbuilders.co.uk/upload/MiniMojoProject.JPG
|
|
|
YQUSTA
|
posted on 12/9/08 at 09:41 AM |
|
|
I would be interested in a stainless logo for my grill.
YQUSTA
|
|
rumplitter
|
posted on 12/9/08 at 10:16 AM |
|
|
I'd be happy to assist, do you have any ideas?
http://www.locostbuilders.co.uk/upload/MiniMojoProject.JPG
|
|
YQUSTA
|
posted on 12/9/08 at 09:32 PM |
|
|
I certainly do
or
not sure whch would be best yet though and sorry the second one is so small
I would not need the grid effect in the first pic, i was thinking along the lines of a solid back ground with the "S" cut out and with the
second pic i was thinking about just using the black and the rest would be cut out.
Thanks in advance and let me know if its possible
YQUSTA
|
|
rumplitter
|
posted on 15/9/08 at 08:15 AM |
|
|
either is possible!
Either embroidered or laser cut in steel
I'd just need to know the size you want/where you're going to use it?
More details the better!
http://www.locostbuilders.co.uk/upload/MiniMojoProject.JPG
|
|
rumplitter
|
posted on 15/9/08 at 08:19 AM |
|
|
here's what I've had done as a sample.
I will photograph the steel plates I'm having Lasered soon.
Rescued attachment logo.jpg
http://www.locostbuilders.co.uk/upload/MiniMojoProject.JPG
|
|
YQUSTA
|
posted on 15/9/08 at 04:08 PM |
|
|
I was thinking of having 1 of them on the grill
size maybe 4 inch diameter
im leaning more on the side of the second 1 for best air flow
how much with p&p do you recon?
Thanks
YQUSTA
|
|
rumplitter
|
posted on 17/9/08 at 07:34 AM |
|
|
Do you already have a grill?
Do you want a grill/logo in one piece?
If so I'd need exact sizes!
if not I'll at least need an idea of fixing details.
Please see the grill design for my mini, you'll get the idea of what I'm talking about.
How much do you want to spend?
Rescued attachment mini grill.jpg
http://www.locostbuilders.co.uk/upload/MiniMojoProject.JPG
|
|
YQUSTA
|
posted on 17/9/08 at 07:45 AM |
|
|
All ready have a grill its an MK Indy and the grill is woven mesh.
for fixing it could have a bolt on the rear of the design then i can put a washer and bolt on it to hold in place?
I will check the hole size of the grill for you when the rain stops
spend as little as possible
Thanks for the help
YQUSTA
|
|
rumplitter
|
posted on 17/9/08 at 08:21 AM |
|
|
Please see attached word doc, either of these any good?
http://www.locostbuilders.co.uk/upload/MiniMojoProject.JPG
|
|
YQUSTA
|
posted on 17/9/08 at 04:51 PM |
|
|
Super
I prefer the left hand 1
I also checked the gril weave and its 5mm diamond's
I like your idea for having 2 mounting points also
let me know how much and i'll forward you my delivery details
YQUSTA
|
|