Board logo

Suspension travel
Aled_g - 15/3/10 at 10:27 AM

Does anyone know the most likely suspension travel for a independant rear Locost before it bottoms out i.e. full bump and full rebound (provided the correct springs are used) cheers


AdamR - 15/3/10 at 01:23 PM

I think the usual to aim for is 3" overall travel, with ride height set such that you have 1" for droop and 2" bump.

Disclaimer: That's based on what I have picked up from this forum rather than any hands-on knowledge or experience.

[Edited on 15/3/10 by AdamR]