Bought ages ago but never fitted as couldn't fit in wipers etc. Now have Goggles and a case of windburn plus an attitude to match the car.
£120
The Screen and frame are, I believe book spec so smaller than some.
The measurement between the scuttle mounts is 35" with angled side aspects to the frame, so not just a rectangle.
The centre scuttle height radius (height from the bottom of the pointy edges to the seal position) is 2.5".
The lower screen frame has a groove for a seal.
There are 'Lift The Dot' pins along the top edge and 3 threaded screw holes for supports either side on the frame.
There is a small crack in the lower corner as photographed but not an MOT failure.
I haven't posted on Ebay yet as wanted to offer it here first. Preferably pickup in person in Lincolnshire for cash but anything is possible. Posting may be expensive and risky as its made of glass!
If the photos are now too small have a look in my photo archive for higher resolution ones.
[/img] [Edited on 4/3/23 by Nick Davison]
[/img] 
[/img] [Edited on 4/3/23 by Nick Davison]
[/img] [img]
[/img] [img]
[/img] [Edited on 4/3/23 by Nick Davison]