dan8400
|
| posted on 4/10/17 at 06:53 PM |
|
|
Cinquecento steering rack question
Hi
Does anyone happen to know the measurement between the swivel ends on the cinquecento rack? May also be called the tie rod pivot width. As in the
picture below:
https://goo.gl/images/bL7hYH
Thanks
Dan
Hey - That's Journey!!!
|
|
|
|
|
russbost
|
| posted on 5/10/17 at 09:25 AM |
|
|
That's the rack we use on the Furore, unfortunately I don't have one on the shelf to measure, but approx measurement taken from one on the
car is 360mm between the 2 rear faces of the rack swivels. Should you happen to need extensions for the rack tie rods we have them & they convert
from the Fiat thread to the Toyota thread for Toyota TRE's as that's our main donor vehicle
The equivalent measurement on the image you gave the link to is 598mm (460 + 2 x 69), so as you can see the Fiat rack is tiny by comparison, hence why
it's so suitable for our application
I no longer run Furore Products or Furore Cars Ltd, but would still highly recommend them for Acewell dashes, projector headlights, dominator
headlights, indicators, mirrors etc, best prices in the UK! Take a look at http://www.furoreproducts.co.uk/ or find more parts on Ebay, user names
furoreltd & furoreproducts, discounts available for LCB users.
Don't forget Stainless Steel Braided brake hoses, made to your exact requirements in any of around 16 colours.
http://shop.ebay.co.uk/furoreproducts/m.html?_dmd=1&_ipg=50&_sop=12&_rdc=1
|
NOTE:This user is registered as a LocostBuilders trader and may offer commercial services to other users
|
dan8400
|
| posted on 5/10/17 at 10:38 AM |
|
|
Thanks Russ
Hey - That's Journey!!!
|
|
|
