Printable Version | Subscribe | Add to Favourites
New Topic New Poll New Reply
Author: Subject: Calipers Back from Bigg Red
Seven_Monkey

posted on 31/3/10 at 09:11 AM Reply With Quote
Calipers Back from Bigg Red

Hi all, just thought I'd post my caliper pic on here and recommend for others.

Bigg Red - sent my Calipers off last week, back today looking almost brand new. Can't fault the service, fast and friendly. All in cost approx £80. But prices are going up today.

Sorry for the pic qlty only have my camera phone with me at work.
Rich Rescued attachment CIMG4445.jpg
Rescued attachment CIMG4445.jpg

View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
big_wasa

posted on 31/3/10 at 09:16 AM Reply With Quote
cool have they put new pistons in ?

are they yours done and back or exchange?

I rang them for my tintop. They are rare and did not have any to exchange so I would have to take the car of the road for as long as it takes.

View User's Profile View All Posts By User U2U Member
Seven_Monkey

posted on 31/3/10 at 09:31 AM Reply With Quote
Hi big_wasa, yes all new fittings and pistons - sent as the pistons were too difficult for me to remove and had rusted... as to whether they are xchange or my units I'm not too sure - I would imagine as it took a week that they are my units recond.
View User's Profile E-Mail User Visit User's Homepage View All Posts By User U2U Member
aka Keith

posted on 31/3/10 at 09:47 AM Reply With Quote
I have recently used Bigg Red to recondition a rear caliper, and have to concur that the service from them was fantastic too.
cheers
Craig

View User's Profile View All Posts By User U2U Member
carlknight1982

posted on 31/3/10 at 10:45 AM Reply With Quote
i too would like to put in a good word for them i ordered a set of caliper seals for my cossie calipers, came next day and fitted flawlessly





Logic will get you from a A to B
Imagination will take you everywhere.

View User's Profile E-Mail User View All Posts By User U2U Member
Bluemoon

posted on 31/3/10 at 12:25 PM Reply With Quote
^^ Yep good guys and very helpful also there pistons are stainless steel (not sure if all models are must ask before ording!), should last a while.

Dan

View User's Profile View All Posts By User U2U Member

New Topic New Poll New Reply


go to top






Website design and SEO by Studio Montage

All content © 2001-16 LocostBuilders. Reproduction prohibited
Opinions expressed in public posts are those of the author and do not necessarily represent
the views of other users or any member of the LocostBuilders team.
Running XMB 1.8 Partagium [© 2002 XMB Group] on Apache under CentOS Linux
Founded, built and operated by ChrisW.